759489
10
Zoom out
Zoom in
Previous page
1/12
Next page
EN-10
EN
2 in 1 Cordless Vacuum Cleaner
SVC 7612VT / SVC 7614TQ
2015
09/2015
MAINTENANCE AND CLEANING
Before cleaning it, always check that the vacuum cleaner is turned off and disconnected from the
el. power source.
Cleaning the dust collection container
Remove the dust collection container A0 from the hand vacuum cleaner. Take the motor protection
filter Aqj and the coarse particle filter Aqk out of the container A0. Remove dust and dirt found
above the basket from the container A0. Use a fine brush to clean the suction opening Aqh.
Remove dust and dirt from filters Aqj and Aqk. In the event of heavy soiling, both filters Aqj and
Aqk may be washed under running water with the use of a neutral kitchen detergent. Allow filters
Aqj and Aqk to dry freely and then assemble the vacuum cleaner according to the instructions
contained in the chapter Assembling the vacuum cleaner. Before returning filters Aqj and Aqk to
the collection container A0, make sure that they are completely dry.
Attention:
To prevent damaging the vacuum cleaner, make sure that the filters Aqj and Aqk are properly
installed in their place before starting the vacuum cleaner.
In the event that the motor protection filter Aqj shows signs of wear, replace it with a new one. To
order it, please contact an authorised service centre.
Cleaning the floor nozzle and attachments
Take the floor nozzle Aqs off the body of the vacuum cleaner A6. Turn it over so that the rotary
brush is pointing upwards. On the right side of the nozzle Aqs the rotary brush is secured with
a locking screw. This needs to be released using a flat screwdriver by turning it in the direction of
the open padlock symbol.
G
1
1 Rotary brush locking screw
Take the locking screw and rotary brush out of the floor nozzle Aqs. Remove all dirt and dust from
the rotary brush and the internal space of the floor nozzle Aqs. After cleaning, return the rotary
brush and locking screw back in their place. Turn the locking screw in the direction of the closed
padlock to fasten the rotary brush.
For cleaning the surface of the floor nozzle Aqs and the attachments Awa and Aws use a dry or
a lightly dampened cloth. Then wipe everything so that it is thoroughly dry.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 7614 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 7614 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info