759447
9
Zoom out
Zoom in
Previous page
1/10
Next page
Vacuum cleaner
SVC 730RD / SVC 730GR
EN
EN-9
05/2019
Copyright © 2019, Fast ČR, a.s.
Cleaning of filters
All filters inside the vacuum cleaner are washable. If they are soiled wash them under running lukewarm
water. If the filters are so soiled that washing does not help, replace with new filters. Before placing the
filter back into the vacuum cleaner ensure that it is completely dry.
Warning:
The vacuum cleaner is equipped with a heat safety fuse, which in the case of over-loading
(e.g. blocked filters) will turn it off. The vacuum cleaner may then only be switched on
once it has cooled. For this reason carry out regular cleaning, i.e. replace filters – this will
extend the life of your vacuum cleaner.
Cleaning your vacuum cleaner.
Use only clean, soft and dry cloth. However, you may dip the cloth slightly into water. Do not use
aggressive solutions or paint thinners!
TROUBLESHOOTING
Before you decide to contact authorized service centre, read these following tips in the
troubleshooting chart:
Problem Possible cause Recommended action
The engine will not
start
- The supply cable is not connected
correctly in the wall power outlet.
- The wall power outlet is damaged.
- The vacuum cleaner is not switched on.
- Inspect the supply cable plug.
Make sure that it is firmly
inserted in the wall outlet.
- Inspect the wall outlet.
- Turn the appliance on.
The suction output is
insufficient
- Vacuum cleaner or its air passageways
are clogged with dirt of foreign object.
- The dust filter needs cleaning.
-
The dust container 5 has been installed
incorrectly, or in wrong position.
- Filter is clogged.
- Remove the clogging or foreign
object.
- Clean the dust filter.
- Close the dust container 5.
- Clean the filter.
The cable is not
wound in completely.
The cable may have slipped down from
the winding pulley during winding.
Hold the cable during the winding.
Make sure to apply slight tension
(by pulling the cable back) to the
cable during the winding process.
The cable cannot be
pulled out. The cable is wound up incorrectly Press the winding button 4 and
try to rewind the cable again.
The speed control is
not working. The appliance has been broken down.
Have the vacuum cleaner repaired
by technician.
(only by qualified technician)
The supply cable starts
to wind in when you
do not need that.
The winding mechanism has broken
down.
Have the vacuum cleaner repaired
by technician.
(only by qualified technician)
The dust container 5
cannot be closed.
The dust filter is installed incorrectly or in
incorrect position.
Reinstall and secure the filter in
position and try again.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 730 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 730 in the language / languages: English as an attachment in your email.

The manual is 0,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info