759497
8
Zoom out
Zoom in
Previous page
1/10
Next page
- 8 - 12/2019
Copyright © 2019, Fast ČR, a.s.
EN Cordless Vacuum
Cleaner 4in1
User'smanual
Prior to using this appliance, please read the user’s manual
thoroughly, even in cases, when one has already familiarised
themselves with previous use of similar types of appliances. Only
use the appliance in the manner described in this user’smanual.
Keep this user’s manual in a safe place where it can be easily
retrieved for future use.
We recommend saving the original cardboard box, packaging
material, purchase receipt and responsibility statement of the
vendor or warranty card for at least the duration of the legal
liability for unsatisfactory performance or quality. In the event
of transportation, we recommend that you pack the appliance in
the original box from the manufacturer.
DESCRIPTION OF THE VACUUM CLEANER AND ITS
ACCESSORIES
A1 Handle of the upright
vacuum cleaner
A2 On/Off button of the
upright vacuum cleaner
A3 Button for setting 2
suction power levels and
2 rotary brush speeds
A4 Connecting cable
located in the joint
between the handle
and body of the upright
vacuum cleaner.
A5 Button for releasing the
hand vacuum cleaner
from the body of the
vacuum cleaner
A6 Body of the vacuum
cleaner
A7 Bagless hand vacuum
cleaner with the Cyclone
system for perfect
separation of dust from
air
A8 Floor nozzle release
button
A9 Floor nozzle with an
electric rotary brush
A10 Air exhaust openings
A11 Dust container
A12 Washable internal
HEPAtype filter
A13 Washable external filter
A14 Hand vacuum cleaner
holder
A15 On/Off button of the
hand vacuum cleaner
A16 LED charging level and
battery power indicators
A17 Dust container release
button
A18 Motor unit of the hand
vacuum cleaner
A19 Air exhaust openings
A20 Hand vacuum cleaner
suction opening
A21 Slot nozzle
A22 Brush nozzle
A23 Charging base with
storage space for the slot
nozzle and brush nozzle
A24 Power adapter
A25 Cat&Dog Mini motorised
brush
DESCRIPTION OF THE MOP ATTACHMENT
G1 Mop attachment
G2 Tank for water / solution
with cleaning detergent
G3 Filling outlets
G4 Removable Velcro mop
cover
G5 Surface to attach the
mop cover (at the bottom
of the attachment, not
shown)
G6 Removable panel with
nozzles (at the bottom
of the attachment, not
shown)
ASSEMBLY AND DISASSEMBLY
1. Hand vacuum cleaner
Insert the internal lter A12 into the external lter A13 and turn
the handle of the internal lter A12 clockwise (see g. B1), until
both lters are joined (see g. B2). Insert the assembled lter into
the dust container A11, and attach the dust container A11 to the
motor unit of the hand vacuum cleaner A18.
It is possible to connect the brush nozzle or slot nozzle A22 or
A21, which are apart of the accessories, to the suction opening
A20.
To disassemble, proceed in the reverse sequence. To remove
the dust container A11, press button A17 and at the same time
remove the dust container A11.
2. Upright vacuum cleaner
To the body of the upright vacuum cleaner A6, connect
the handle A1 so that the connecting cable A4 is inside the
connection. Secure the connection with the supplied screw, see
g. C. Into the body of the upright vacuum cleaner A6, insert the
assembled hand vacuum cleaner A7 (without attachment A21 or
A22). Connect the oor nozzle A9 to the bottom part of the body
of the vacuum cleaner A6, see g. C. The connection of the nozzle
A9 is indicated by the button A8 sliding out.
To disassemble, proceed in reverse sequence. To remove the oor
nozzle A9, press the button A8 and at the same time remove the
nozzle A9. To take the hand vacuum cleaner A7 out of the body
of the upright vacuum cleaner A6, press the button A5 and at the
same time take out the hand vacuum cleaner A7.
3. Charging base
Assemble the charging base A23 by inserting the top part
into the bottom part (see g. D). To ensure better stability, the
charging base A23 can be attached to awall using the attached
screws, whilst it is necessary to ensure that the charging base
A23 is located within reach of apower socket.
To disassemble, proceed in reverse sequence.
PARKING POSITION OF THE VACUUM CLEANER
Put the upright vacuum cleaner into the parking position by
placing the tip of your foot on top of the oor nozzle A9 and with
asimple forward movement of the handle A1 secure the vacuum
cleaner in the vertical position. The latch located at the front on
the elbow of the oor nozzle A9 will slide into the groove on the
top cover of the oor nozzle A9.
To release the upright vacuum cleaner from the parking position,
place the tip of your foot on top of the oor nozzle A9 and tilt the
handle A1 backwards. The latch located at the front on the elbow
of the oor nozzle A9 will slide out of the groove on the top cover
of the oor nozzle A9.
CHARGING THE VACUUM CLEANER
Locate the assembled charging base A23 on an even, dry and
stable surface within reach of apower socket.
Connect the connector of the power adapter A24 to the socket
located on the side of the charging base A23, and insert the plug
of the power adapter A24 into apower socket.
Place the upright vacuum cleaner, that you have previously
turned o and put in the parking position, into the base A23,
see g. E. After being inserted into the charging base A23,
the vacuum cleaner will switch to charging mode and the LED
indicators A16 will signal the power level of the built-in battery.
Afull charge requires approximately 6 hours. The actual charging
time depends on the power level of the battery.
Once the charging process is complete, all the LED indicators
A16 will be lit. Disconnect the power adapter A23 from the
power socket.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SVC 0625 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SVC 0625 in the language / languages: English as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info