758819
5
Zoom out
Zoom in
Previous page
1/6
Next page
05/2017
- 5 -
Copyright © 2017, Fast ČR, a.s.
EN Slow Juicer
User’smanual
Prior to using this appliance, please read the usersmanual thoroughly, even
in cases where you have previously familiarised yourself with the operation of
similar types of appliances. Only use the appliance in the manner described in
this user manual. Keep this user’smanual in asafe place where it can be easily
retrieved for future use.
We recommend saving the original cardboard box, packaging material,
purchase receipt and responsibility statement of the vendor or warranty card
for at least the the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we recommend that you pack the
appliance in the original box from the manufacturer.
DESCRIPTION OF THE JUICER
A1 Pusher
A2 Feed tube with hopper and lid
A3 Auger
A4 Titanium ltration microstrainer
A5 Strainer holder
A6 Tritan juice collector
A7 Closable juice spout
A8 Juice jug with capacity of 0.8l
A9 Pulp outlet
A10 Pulp container with capacity of 0.8l
A11 Control dial for turning the juicer
on and o with the option of
setting reverse motor rotation
R–OFF–ON (reverse motor
rotation–o–on)
A12 Base with motor unit
A13 Anti-slip feet
A14 Cleaning brush
THE PRINCIPLE AND ADVANTAGES OF AMASTICATING SLOW
JUICER
The operating principle of this juicer is based on asystem where ingredients are
juiced slowly. The auger rst coarsely masticates the inserted ingredients and in
the subsequent phase juice is separated from the pulp. Juice pressed out in this
way contains minimal bre content and so is characterised by ahigh purity, it
is slower to oxidise and retains valuable vitamins and enzymes. The strainer is
automatically cleaned during operation and so it is not excessively clogged and
is easier to clean after use.
This juicer is suitable for juicing both soft and hard fruits and vegetables
such as citrus fruits, currants, gooseberries and other berries, apples, pears,
carrots, beetroot, cucumbers, pineapple, melon, etc. It can even handle leafy
vegetables, however we recommend to process them together with other fruits
and vegetables.
It is not particularly suitable for juicing purely leafy vegetables, overripe fruits or
oury apples.
BEFORE FIRST USE
1. Remove all packaging materials from the appliance and its accessories.
2. Thoroughly wash all removable parts (pusher A1, feed tube with hopper and
lid A2, auger A3, strainer A4, strainer holder A5, juice collector A6, the juice jug
A8 and pulp container A10) that come into contact with food in warm water
using kitchen detergent. Then rinse all these parts under clean running water
and thoroughly wipe dry with ane wiping cloth.
Attention:
No part of this juicer is designed to be washed in adishwasher.
ASSEMBLING THE JUICER
1. Place the base A12 on an even, dry and stable surface. During assembly, the
appliance must be turned o and disconnected from the power socket.
2. Pick up the juice collector A6 and turn it upside down. There is ablack silicone
plug on the bottom of the collector at the pulp outlet A9. To prevent pulp from
escaping out o the outlet A9, it is necessary to properly seal the hole at the
outlet A9 with the silicone plug.
Note:
To enable easier cleaning, the pulp outlet A9 has ahole with asilicone
plug.
3. Put the juice collector A6 to its correct position. Place it on the base A12 so
that the projections on the top side of the base A12 slide into the holes on the
bottom of the juice collector A6. Turn the juice collector A6 clockwise to rmly
connect it to the base A12. When the juice collector A6 is correctly attached to
the base A12, it cannot be lifted up separately.
4. Insert the strainer A4 into the holder A5.
5. Into the juice collector A6, place the holder A5 with the inserted strainer A4
so that the symbol on the strainer A4 is in alignment with the same symbol
marked on the juice collector A6. Push the holder A5 with the strainer A4
downwards.
6. Insert the auger A3 into the strainer A4 and push it downwards. Acorrectly
seated auger A3 is signalled by an audible click.
7. Place the feed tube with hopper and lid A2 on to the juice collector A6. If the
hopper is removed from the feed tube A2, rst connect these two parts. Make
sure that the open lock symbol marked on the lid A2 is aligned with the
symbol on the juice collector A6. Then turn the feed tube A2 clockwise all the
way. This will secure the lid A2 on the juice collector A6. The symbol “ marked
on the juice collector A6 will now be aligned with the closed lock symbol on the
lid A2.
8. Insert the pusher A1 into the feed tube A2.
USING THE JUICER
1. Make sure that the juicer is correctly assembled and then connect it to the
power socket. The juicer is equipped with asafety mechanism that prevents it
from being started unless the lid is correctly secured in the correct position.
2. Place the juice jug A8, aglass or another suitable container below the juice
spout A7. Open the lock of the juice spout A7 so that the juiced juice can ow
freely out of the juice collector A6. Place the pulp container A10 below the pulp
outlet A9.
3. Prepare the fruit or vegetables. Thoroughly wash the ingredients and cut them
up into pieces that will pass through the feed tube A2. Remove hard stones
that are contained in, for example, apricots, peaches, mangoes, etc. and inedible
peels, e.g. from oranges, pineapples, melons, mandarins, etc.
4. Prior to starting the juicer, make sure that the lid is properly secured in the
correct position. To turn on the juicer, turn the control dial A11 to the ON
position. Take the pusher A1 out of the feed tube A2 hole. Gradually add the
prepared ingredients into the feed tube A2 and push them down using the
pusher A1. You will achieve optimal results if you ll the feed tube A2 gradually
pushing the ingredients down gently.
Attention:
Do not use ngers or other utensils to push ingredients through the feed
tube A2. Always use the pusher A1 designed for this purpose.
The maximum time of non-stop operation of this appliance is 15 minutes.
Then allow it to cool down for 10 minutes.
5. If the juice jug A8 or pulp container A10 ll up during the juicing process, turn
the juicer o by turning the control dial A11 to the OFF position, empty out the
respective container and then put it back in its place. Then you can put the juicer
back into operation and continue juicing.
6. When you have nished juicing, we recommend that you remove pulp remains
from the juice collector A6. Hold the control dial A11 in the “R” position (reverse
motor rotation) for 3–5 seconds, and then release it so that it returns to the
OFF position. Repeat the entire process two to three times. You can do the
same in the event that you clog up the appliance with an excessive amount of
ingredients.
7. Turn the juicer o by setting the control dial A11 to the OFF position and
disconnect it from the power socket. Prior to removing the juice jug A8, we
recommended closing the spout A7 so that juice does not drip out of it.
8. Disassemble the juicer, see chapter Disassembling the juicer and clean it out
according to the instructions contained in chapter Cleaning and maintenance.
DISASSEMBLING THE JUICER
1. Before disassembling the juicer, make sure that it is turned o and disconnected
from the power socket. Make sure that all parts that move during operation
have stopped moving.
2. Close the juice spout A7 and remove the juice jug A8 and the pulp container
A10. Take the pusher A1 out of the feed tube A2.
3. Turn the feed tube A2 anticlockwise until the open lock symbol shown on the
lid A2 is aligned with the symbol on the juice collector A6 and then take it o
the juice collector A6.
4. Remove the juice collector A6 with the holder A5, strainer A4 and auger A3
inside o the base A12 by turning it anticlockwise and lifting it up.
Note:
It will be easier to take the juice collector A6 o the base A12 when the
pulp remains are cleaned out after juicing, as described in point 6 in
chapter Using the juicer.
5. Take the auger A3, strainer A4 and holder A5 out of the juice collector A6.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SSJ 4050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SSJ 4050 in the language / languages: English as an attachment in your email.

The manual is 0,57 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor SSJ 4050

Sencor SSJ 4050 User Manual - Dutch - 6 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info