757129
3
Zoom out
Zoom in
Previous page
1/3
Next page
3.8 Channel Scan 5.2 Low Battery Meter Indicator
Your radio can scan the 8 channels to any activity. This allows to find The PMR can detect the low battery level when battery
other radios without having to change the channel. voltage goes low. The battery icon will display the low
To activate this feature: battery status as follows.
a. Press and old the and button at the same time and channel When battery voltage at low battery level. The empty battery
symbol will appear at this stage and continue to blink
scanning will start immediately, with SC displayed on the The battery icon will continue to blink until it totally drain
screen and the channel number cycling through the channels. the battery voltage.
When a signal is detected, the unit will pause on that channel, while
receiving the signal and for a further 3 seconds. Note: To have good communication, once the battery reach
in low battery level, replace the batteries into new ones.
b. Press the PTT button to stop scanning and talk on that channel,
or press the or button to manually start the scanning.
c. To stop the scanning, press the button and return to 5.3 Microphone/Earphone/Charger Jack
standby mode. The SMR 130 is equipped with and auxiliary microphone, earphone,
and charge jack located at the opposite side of PTT button.
3.9 Monitor Feature Note: It requires a microphone/earphone with a 2.5mm, 3-pole
You can use the Monitor feature to check for weaker signals in the jack connector and this is not supplied with your SMR 130.
current channel.
a. Press and hold the and button at the same time. The 5.4 Using a Hands free kit (Headset)
receiving icons “RX” appears on the display. You can plug a hands free kit into the
Your handset will pick up any signals on the current channel. right side of your FX-238 handset. With
b. Press the button to stop the monitoring hands free kit, by pressing the PTT button
4.0 To Lock the Buttons to transmit and talk with other radios
With the buttons lock you can still transmit (TX), or call the current
channel, but you can not change the volume. To activate this 5.4 Specifications
feature;
In the standby mode, press and hold the until the
icon appears on the LCD screen.
To unlock the buttons
Press and hold again the button until the icon
disappears on the LCD screen.
Channel Frequency Table
5. Auxiliary Features
5.1 Power Saving
Your PMR unit has special circuitry designed to extend the life of
your battery. When the unit is not used for 4 seconds, it will
automatically switch into a low power mode. The Power
feature does not affect the PMR ability to receive
transmissions. When a signal is detected, it automatically
returns to full power mode.
Cha
nnels Avail
a
ble
8 Channels
Output Power (TX)
0.5 W
Range
Up to
5
Km.
Cha
n
nel
Frequency (MHz)
Cha
n
nel
Frequency (MHz)
1
446.00625
5
446.05625
2
446.01875
6
446.06875
3
446.03125
7
446.08125
4
446.04375
8
446.09375
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SMR 130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SMR 130 in the language / languages: English as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info