759996
8
Zoom out
Zoom in
Previous page
1/10
Next page
EN-8
EN
Automatic rotating curling iron
SHS 0900GD
Copyright © 2020, Fast ČR, a.s. Revision 04/2020
Note:
If you change the temperature after the appliance has finished heating up, the ready
indicator will gradually light up on the display A6. When the curling iron heats up,
the ready indicator will be lit.
Note:
Alower temperature is suitable for fine, dyed and damaged hair. A higher
temperature is suitable for normal, thick and strong hair.
Setting the rotation speed of the cylinder
Repeatedly press button A10 until “R appears on the display A6.
Use the + or – buttons to set the desired rotation speed of the cylinder. The speed can be
set in the range from 1 to 5, where speed 1 is the lowest and speed 5 is the highest.
Setting the hair strand wound on time
Repeatedly press button A10 until “T appears on the display A6.
Use the + or – buttons to set the time for which the hair strand will remain wound on to the
cylinder A2. The time can be set in the range from 3 to 12 seconds.
Using the curling iron
1. Thoroughly comb out your hair before use.
2. Set the desired temperature, cylinder rotation speed and when necessary also the hair
strand wound on time.
3. Hold the curling iron with one hand vertically next to the hair strand.
4. Carefully wind ahair strand around the cylinder A2 and then press the rotate right button
A4 or the rotate left button A5. The tines will help the hair strand to automatically wind
on to the cylinder A2.
Note:
It is important for the rotate right button A4 or rotate left button A5 to be held
down for the entire winding time.
5. Once the whole (or as necessary only its part) hair strand is wound on to the cylinder A2,
release the rotate right button A4 or the rotate left button A5 and wait afew seconds for
the hair strand to heat up. If you have set the time for which the hair strand is to remain
wound up on the cylinder A2, abeep will be made after this time elapses. This indicates
that you should release the hair strand from the cylinder A2.
6. In order to release the hair strand from the cylinder A2, carefully pull the curling iron
downwards.
7. Repeat the entire process with the remaining hair strands.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SHS 0900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHS 0900 in the language / languages: English as an attachment in your email.

The manual is 0,31 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info