Manual Sencor SHI 4400 (page 5 of 6) (English)

760027

Zoom out

Zoom in

1/6

EN Hair straightening iron

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

In the event that you hand this appliance over to somebody else, make sure to also

include this user'smanual.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

■ Carefully unpack the appliance and take care not to throw away any part of the

packaging before you find all the parts of the appliance.

DESCRIPTION OF THE APPLIANCE AND ACCESSORIES

A1 Display

A2 Swivel power cord end

A3 Hanging loop

A4 Main switch

A5 Ironing plates with infra-red heat

indicators

A6 Ionisation function indicator

A7 Increase temperature button

A8 Decrease temperature button

PURPOSE OF USE AND FEATURES OF THE HAIR STRAIGHTENING

IRON

■ The hair straightening iron is intended exclusively for straightening and styling

human hair. It must never be used for styling wigs, hairpieces, synthetic hair or for

straightening animal fur.

■ The iron is equipped with a temperature lock feature that prevents accidental

changes to the temperature while hair is being straightened, and furthermore with

an automatic shut-off function that is activated after 60minutes of inactivity.

■ The surface of the ironing plates is coated with titanium and enables operating

temperatures from 100 °C to 230 °C. The temperature can be controlled in

10°Cincrements.

APPLICATION

TURNING ON AND SETTING THE TEMPERATURE

■ Connect the iron to apower socket. The display A1 will show OFF.

■ Hold down button A4 for longer than 3seconds. The appliance will beep and the

default temperature of 180°C will be lit on the display and the iron will start heating

up. The blue ionisation function indicator A6 and the infra-red plate heat indicators

A5 are lit.

■ The temperature can be adjusted in 10-degree increments in the range from

100°Cto 230°Cusing buttons A7 andA8.

Note:

If "888" appears on the display, this indicates that there is amalfunction of

the heat sensor or iron. If this happens, disconnect the iron from the power

grid and contact aservice centre.

TEMPERATURE LOCK FUNCTION

■ This function prevents accidental changes to the temperature while the iron is being

used. Activate the function by holding down button A8 for longer than 3seconds.

The text LOC will appear on the display and the set temperature will be locked, i.e.

no button will react when pressed.

■ Deactivate the function by holding down button A8 for longer than 3seconds. The

text LOC will disappear.

AUTOMATIC SHUT-OFF FUNCTION

■ If no action is taken after turning on the iron, i.e. no button is pressed, then for safety

reasons, the iron will turn off automatically after 60minutes of inactivity. It will start

again after button A4 is pressed.

Attention:

The automatic shut-off is intended only for cases, where you

forget to turn off the iron using button A4. Do not use the

automatic shut-off to intentionally turn off the iron.

TEMPERATURE DEPENDING ON HAIR TYPE

■ The suitable temperature for straightening hair depends on the hair structure.

Depending on the type of hair, an incorrectly selected temperature may cause the

hair to dry out, become brittle or in the worst case to burn. Therefore, first try ironing

at alow temperature (100°C) and set ahigher temperature only when necessary.

■ The information contained in the following table is for reference purposes only. It

may differ depending on hair type.

Hair type Temperature

Fine, damaged, discoloured, highlighted or dyed hair 100°Cto 150°C

Normal, lightly wavy hair 150°Cto 190°C

Very heavy, curly, unyielding hair 190°Cto 230°C

PROCEDURE FOR IRONING HAIR

■ Wash your hair thoroughly, dry it completely and brush through thoroughly so that

it is smooth and without knots.

■ Separate this prepared hair using clips into equally wide strands (about 5cm wide).

■ Start to iron the back part of the head at the lower strands of hair – at the root place

the strand of hair between the plates and gently press the handle of the iron. With

asliding motion pull the iron all the way to the ends of the hair.

■ Repeat the procedure for the same strand of hair until you achieve the desired

appearance.

■ Continue in the same way with the remaining strands of hair (first on the front part

of the head and ending at the sides).

■ Before the final combing, allow the hair to fully cool down.

Attention:

Do not touch the ironing plates - there is adanger of burns!

Do not leave the iron in the one spot for longer than

5seconds as hair could be burnt.

Use the iron only on healthy hair. Do not use the iron on oily,

stuck together or sweaty hair. On perm or coloured hair only

use the iron infrequently.

Tip:

Adjust the speed of movement of the iron on the hair strands according

to their character (fine hair is more sensitive to a hot surface and

requires asignificantly shorter ironing time than stronger hair).

TURNING OFF THE IRON

■ When you have finished ironing, turn off the iron by holding down button A4.

Abeep will be made and the display will show OFF.

■ Disconnect the iron from the power socket.

Attention:

Allow the iron to fully cool down before storing!

CLEANING AND MAINTENANCE

Attention:

Clean the ironing plates only after they have fully cooled

down!

No part of the iron may be submerged in water or washed

under running water!

■ To clean the outside parts of the iron and the ironing plates, use a fine cloth

dipped in lukewarm water. Do not use aggressive cleaning agents, paint thinners

or solvents. Using these solutions could damage the surface of the product. The

surface of the iron plates does not need any further cleaning.

STORAGE

When not using the iron for an extended period of time, do the following:

■ Clean the iron as described in chapter Cleaning and maintenance.

■ Place the iron in asafe, dust-free, clean and dry place that is out of reach of children.

TECHNICAL SPECIFICATIONS

Rated voltage range ..................................................................................................... 100−240 VAC

Rated frequency........................................................................................................................50/60 Hz

Rated power .......................................................................................................................................45 W

Temperature range .........................................................................................................100 to 230 °C

Electrical shock protection class ........................................................................................................ II

EXPLANATION OF TECHNICAL TERMINOLOGY

Safety class for electrical shock protection:

Class II – Electrical shock protection is provided by double or heavy-duty

insulation.

We reserve the right to change text and technical specifications.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SHI 4400 in the language / languages: English as an attachment in your email.

The manual is 0,39 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SHI 4400 Manual

Product: