759933
3
Zoom out
Zoom in
Previous page
1/7
Next page
10/2019
- 3 -
Copyright © 2019, Fast ČR, a.s.
Before connecting the appliance to apower socket, check that the rated voltage on its
rating label matches the electrical voltage in the power socket.
Do not connect the appliance to an extension cord or two way adapter.
Attention:
Do not use this appliance with aprogrammer, timer switch, aremote control
system or any other device which would switch the appliance on automatically,
because there is a danger of a fire if the appliance is covered or incorrectly
located.
The appliance is designed for use in households, offices and similar types of areas.
Do not use the appliance in very dusty or humid rooms such as laundries or bathrooms,
in areas where chemicals are stored, in industrial surroundings or outdoors.
When the appliance is in operation, it must not be located on an unstable surface, e.g.
sofa, carpets with very long and thick fibres, etc. The appliance must always be located
on an even, dry and stable surface.
Free space of at least 50 cm in front of the appliance and 30 cm behind the appliance
must be maintained while it is running to ensure sufficient air circulation. Do not use the
appliance in the near vicinity of curtains, drapes or other flammable materials.
Do not insert any objects through the front air outflow grill or the back air inflow grill.
This could lead to an electrical short circuit or damage the appliance.
To avoid potential injury by electrical shock, do not submerge any part of this appliance
under water or any other liquid.
Do not touch the appliance with wet or damp hands when it is connected to apower
socket.
Do not leave the appliance in operation while sleeping.
Always turn off the appliance and disconnect it from the power socket when not using
it or before cleaning it.
To avoid damaging the power cord, do not bend or twist it. Make sure that it does not
come into contact with hot surfaces or sharp objects.
Do not disconnect the appliance from the power socket by pulling on the power cord.
This could damage the power cord or the socket. Disconnect the cord from the power
socket by gently pulling the plug of the power cord.
If the power cord is damaged, it must be replaced by an authorised service centre or by
another similarly qualified person, this will prevent the creation of adangerous situation.
Do not use the appliance if it is not working correctly, if it has been damaged or has
been submerged in water. To avoid the danger of injury by electrical shock, do not repair
the appliance yourself or make any adjustments to it. Have all repairs of the appliance
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SFH 7021 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SFH 7021 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info