04/2017
- 5 -
Copyright © 2017, F
EN
Espresso Machine
User'smanual
Prior to using this appliance, please r
in cases, when one has already familiarised themselves with previous use of
similar types of appliances. Only use the appliance in the manner described
in this user’s
easily retrieved for future r
We r
purchase receipt and responsibility statement of the v
for at least the duration of the legal liability for unsatisfactory performance
or quality. In the event of transportation, we rec
appliance in the original box from the manufacturer
DESCRIPTION OF
A1 Cup warming plate
A2 Power indicator light
A3 Coffee brewing wa
temperature indicator
A4 Steam release water
temperature indicator
A5 Coffee brewing and steam
release mode toggle button
A6 Brew head
A7 Portafilter with coffee spout
A8 Removable grate
A9 Removable drip tray
A10 Tilt-down lid with handle
A11 1.5-litre removable wat
A12 Selection knob, 3 options
– brew coffee , stand-by
mode and steam release
A13 Boiler (not shown)
A14 Swivel steam nozzle
A15 Removable milk frothing
attachment
A16 ON/OFF switch
A17 Stainless steel filter for 1 cup
of coffee
A18 Stainless steel filter for 2 cups
of coffee
A19 Coffee measuring cup with
tamper
BEFORE FIRST USE OF
1. Remove all packaging materials, protective film, promotional tags or labels
from the appliance.
2. I
tank A11 out of the appliance and rinse it out with clean water with the
addition of asmall amount of neutral dishwashing detergent.
out thoroughly using clean water
3. Take out the remoA9 with grate A8 , wipe with adampened
textile, wipe dry and insert it back into the bottom par
4. Wash the portafilter A7 , coffee measuring cup A19 and the stainless st
filters A17 and A18 under clean running water with an addition of kitchen
detergent.
5. Wipe the outer sur
then wipe it thoroughly dry.
6. Prior to brewing the first cup of coff
approximately 60 secondsA11 filled with water
but without coffee tamped in the filter
components and the brew head A6 . A sufficiently large container must
be placed underneath the portafilter A7 for the hot water to flow into
Instructions for starting the appliance are provided in chapter Operating
the appliance.
OPERA
1. FILLING THE W
1.1 Grasp the wA11 by the handle A10 . Lift it up and remove it from
the rear part of the appliance.
1.2 Fill it up with c
the appliance and tilt down the lid with handle A10 . A11
must be securely seated in place in order f
into the boiler A13 .
Note:
The water that you pour intA11 should ideally be
at room temperature (appr
could negatively affect the final taste of the coff
Attention:
The water tank A11 has a
Do not overfill it.
Never fill the water tank A11 with warm water
water
Do not fill the water tank A11 when it is inserted in the appliance.
There is adanger of splashing the appliance or overfilling the water
tank A11 .
1.3 A11 for longer than
one day
Otherwise, the resulting flavour of the coffee beverage may be nega
affected.
2.
2.1 C
tank A11 is filled with fresh waterA9 and grate A8 ar
installed in their place and that the knob A12 is set to the stand-by mode
position.
2.2 A16 to the ON position. Indicator
A2 will be lit.
2.3 A6 place acup into which hot water will flow.
Make sure the button A5 is in the pressed out position that is intended f
the coffee brewing mode. Set the knob A12 to the coff
As soon as water starts flowing out of the brew head A6 , set the knob
A12 back to the stand-by mode position.
appliance is turned on to pump water from the watA11 into the
boiler A13 . In the boiler A13 , water is heated t
temperature.
3.
3.1
A7, filter A17 or A18, and cups are preheated
wa
3.2 PA1 and allow them to
warm up.
3.3 Select filter A17 or A18 and insert it into the porA7 so that it
securely slides in along the entire perimeterA7
underneath the brew head A6 so that the handle is pointing to the left.
This position is marked with
fasten the portafilter A7 to the brew head A6 , turn the handle to the right
to the
3.4 WA3 is lit, and set knob A12 again to the coffee brewing
mode position. Hot water will start flowing out of the spout on the
portafilter A7 into the cup located under the spout. A3
turns off, set the knob A12 back to the stand-by mode position. Remove
the cup containing the hot water
4. BREWING
4.1 A7 out of the appliance and dry the filter with apaper
towel.
4.2 Place the portafilter A7 on to an even surface and pour the corresponding
amount of ground coffee inA17 is
filled with aA19 of coffee
filter A18 is filled with double the amount of coffee. One lev
cup A19 is equivalent to 7 g of ground coffee. Spread the coff
inside the filter and gently tamp it down with the flat end of the measuring
cup A19 .
4.3 A17
or A18 . Inser A7 underneath the brew head A6 so that the
handle is pointing to the left.
front panel of the appliance. A7 to the brew head
A6, turn the handle to the right to the
4.4 Place one or two preheaA7 . Make sure
that the cups are located underneath the spout.
4.5 A3 is lit, set knob A12 to the coffee brewing mode
position. W
Note:
The indicator A3 may turn off while the coffee is being e
This signals aA13 .
The indicator A3 will light up again as soon as the boiler A13 heats
the water up to the ideal coffee br
Once the required amount of coffA12 to the
stand-by mode position.
extraction time for acup of espresso should be between 20 and 30 seconds
and the volume should be approximat
4.6 If you do not fill the filter with ground c
water
4.7
grounds, clean out the filter acc
chapter Maintenance and cleaning and pour out the water from the drip
tray A9 . When returning the drip tray A9 to its place
against the back wall of the appliance.
