Manual Sencor SCP 4601 (page 5 of 6) (English)

759018

Zoom out

Zoom in

1/6

EN Double induction

cooktop TouchControl

User'smanual

■ Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user’smanual.

Keep this user'smanual in asafe place where it can be easily retrieved for future use.

■ We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Air inlet (at the back of the

appliance)

A2 Hotplates

A3 Fan and air outlet

(on the underside of the appliance)

A4 Control panels with display

A5 Anti-slip feet

DESCRIPTION OF THE CONTROL PANEL

B1 Power setting button

B2 Temperature setting button

B3 Minus (–) button

B4 Display – shows the hotplate power

level, set temperature, automatic

shut-off time or error message

codes. If the cooktop is in the stand-

by mode, the display will show

"OFF".

B5 Plus (+) button

B6 Timer button

B7 On/Off button

B8 Hot hotplate indicator light (is

lit when the temperature of the

hotplate is higher than 80°C)

B9 Power level indicator light

B10 Temperature indicator light

B11 Timer indicator light

BEFORE FIRST USE

■ Before first use, take the appliance and its accessories out of the packaging material

and remove all promotional labels and stickers. Check that neither the appliance nor

any of its parts is damaged.

■ Wipe the surface of the appliance with aclean, lightly dampened cloth. Then wipe

it dry.

INDUCTION AND SELECTING SUITABLE COOKWARE

■ Underneath the hotplate there is an induction coil that, when turned on, creates

avariable electromagnetic field. The induction current generated by this field starts

heating the bottom of the pot or pan that is placed on the hotplate. To ensure

proper operation, it is important that the cookware is ferromagnetic. This property

can be verified using asmall magnet placed against the bottom of the pot or pan.

If there is an attraction between the magnet and the bottom of the pot or pan then

the cookware is ferromagnetic and hence suitable for use on an induction hotplate.

This includes, for example, cast iron, steel, enamelled and stainless steel cookware

with aferromagnetic bottom.

■ We recommend that the base of the cookware is flat and straight. The minimum

diameter of the base is 12cm, the maximum diameter may be up to 2cm past the

edge of the hotplate. The induction hotplate automatically adapts to the size of the

used pot or pan.

■ If, on the other hand, there is no attraction between the magnet and the bottom of

the pot or pan then the cookware is not suitable for use on an induction hotplate.

As arule, this includes cookware made from copper, pure stainless steel, aluminium,

glass, wood, ceramics, stone, etc.

Note:

When unsuitable cookware is used or if the hotplate detects that there

is no cookware on it, then it will turn off automatically. This is anormal

safety feature that prevents damaging the appliance.

RADIO WAVE INTERFERENCE

■ The use of the induction cooktop may cause interference to your radio, television

or similar receivers.

If this occurs, we recommend to:

■ redirect the radio or television antenna;

■ move the cooktop farther away from the radio, television or receiver;

■ insert the power plug into adifferent power socket with an independent circuit.

OPERATING THE APPLIANCE

■ Place the appliance on akitchen countertop or on atable within reach of apower

socket. At the same time, make sure that all safety instructions are followed.

■ Make sure that there are no foreign objects located on the hotplate A2 and that

its surface is clean.

■ Fully unwind the power cord and connect it to apower socket.

Note:

Since the appliance heats up during operation, the power cord must

be located in such a way that it is not touching the surface of the

appliance.

Note:

Plug the appliance into aseparate power socket with an independent

circuit breaker. Necessary circuit breaker – 16A.

Turning on the cooktop

To turn on the cooktop, press button B7. The display B4 will show "ON".

Place apot or pan on the hotplate A2.

Press button B1. The appliance automatically detects the pot or pan. If the used

cookware is suitable, the appliance will start automatically at the preset power level.

The display B4 will show the preset power value and the fan A3 will start.

If the used cookware is not suitable, the appliance will not start. The error message E0

will appear on the display B4 and the appliance will beep. After awhile the appliance

will automatically switch to the stand-by mode.

If you take the cookware off the hotplate A2, the display B4 will show the error

message E0 and the appliance will beep. After awhile the appliance will automatically

switch to the stand-by mode.

Turning off the cooktop

When not using the cooktop, press button B7 to turn the cooktop off. The display B4

will show "OFF". The cooktop will switch to the stand-by mode. Disconnect the power

plug from the power socket.

Note:

The fan A3 will run for acertain time after the cooktop is turned off so

that it cools down faster. Do not pull the power plug out of the power

socked until the fan A3 turns off completely.

Note:

When first turned on, there may be light smoke emitted. This is an

entirely normal event, which will disappear after afew minutes.

Setting the power level

When the cooktop is turned on for the first time, it will start at the preset power level.

Press button B1 and indicator light B9 will be lit.

To set the power level use buttons - B3 or + B5. The power level on the left hotplate

can be set from 100Wto 2,000W, and on the right hotplate the power level can be set

from 100Wto 1,400W.

Setting the temperature

When the cooktop is turned on for the first time, the preset temperature is set to

"120°C".

Press button B2 and indicator light B10 will be lit.

To set the temperature, use buttons - B3 or + B5. You can set the temperature in the

range from 60 to 240°C.

Setting the power level and automatic shut-off

Press button B1 and indicator light B9 will be lit. Then press the timer button B6. The

display B4 will show "00:00". Using buttons - B3 or + B5, set the time after which

the cooktop will automatically turn off, in the interval from 1 minute to 3 hours. The

automatic shut-off is set in one-minute increments.

The set automatic shut-off time will start flashing on the display B4 for approximately

5 seconds and then the appliance will automatically switch to the power level setting.

The default power will appear on the display B4. To set the power level use buttons

- B3 or + B5.

The set time will start counting down on the display B4.

During the set time, you can change the set power level using buttons - B3 or + B5.

When the set time elapses, the cooktop will beep and automatically switch to the

stand-by mode.

Setting the temperature and automatic shut-off

Press button B2 and indicator light B10 will be lit. Then press the timer button B6.

The display B4 will show "00:00". Using buttons - B3 or + B5, set the time after which

the cooktop will automatically turn off, in the interval from 1 minute to 3 hours. The

automatic shut-off is set in one-minute increments.

The set automatic shut-off time will start flashing on the display B4 for approximately

5 seconds and then the appliance will automatically switch to the temperature setting.

"120°C" will appear on the display B4. To set the temperature, use buttons - B3 or + B5.

The set time will start counting down on the display B4. The countdown time and the

set temperature will be intermittently shown on the display B4.

During the set time, you can change the set temperature using buttons - B3 or + B5.

When the set time elapses, the cooktop will beep and automatically switch to the

stand-by mode. The display B4 will show "OFF".

Overheating protection

■ The appliance is equipped with overheating protection. In the event that there

is arisk of it overheating (you placed an empty pot or pan on the hotplate), the

appliance will beep and turn off automatically.

Note:

For safety reasons, the cooktop will turn off automatically after two

hours of operation if you do not press any button or adjust the settings.

CLEANING AND MAINTENANCE

■ Clean the appliance after every use. Makes sure that dried on food or other residues

do not accumulate on it. Before cleaning it, always turn off the appliance using the

On/Off button B7, disconnect the power cord from the power socket and allow the

appliance to cool down completely.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCP 4601 in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SCP 4601 Manual

Product: