688570
8
Zoom out
Zoom in
Previous page
1/10
Next page
EN-8
Electric Coffee Grinder
SCG 2050RD / SCG 2051BK / SCG 2052WH
EN
11/2016
Copyright © 2016, Fast ČR, a.s.
BEFORE FIRST USE
1. Remove the coffee grinder from the packing material.
2. Turn the lid A1 anticlockwise to release it, then take it off. Wash it under warm running water using
kitchen detergent. Then rinse it with clean water and thoroughly wipe dry.
3. Wipe the hopper A2 and the grinding blade A3 with a clean lightly dampened wiping cloth and
then wipe it until it is thoroughly dry.
Attention:
When cleaning the grinding blade A3, be very careful not to injure yourself on the sharp edge.
USING THE COFFEE GRINDER
1. Wind the power cord out of the storage area A7.
2. Turn the lid A1 anticlockwise to release it, then take it off. Pour coffee beans into the hopper A2. The
hopper A2 has a maximum capacity of 60 g of coffee beans. Do not fill the hopper A2 past the edge.
Tip:
You may also use the coffee grinder for grinding nuts, herbs, poppy seeds and certain types of
spices. Shells must be removed from nuts before grinding.
Attention:
Do not use the coffee grinder to grind excessively hard foodstuffs such as nutmeg, etc.
3. Place the lid A1 on to the hopper A2 and turn it clockwise until the symbols marked on the lid
A1 and the coffee grinder base unit A4 line up. This will lock the lid A1 in place. When locked in
place, the lid A1 cannot be lifted off. The coffee grinder is equipped with a safety mechanism that
prevents it from being started when the lid A1 is not properly attached.
4. Connect the coffee grinder to a power socket and press the pulse button A5 to start it. The coffee
grinder will continue to run while the button A5 is pressed. The coarseness of the ground coffee
depends on the grinding time. The longer you grind it, the finer it will be.
Attention:
The maximum continuous operating time is 30 seconds. After 30 seconds of continuous
operation, allow the coffee grinder to rest for 2 minutes.
Tip:
Always prepare your coffee beverage from freshly ground coffee. Coffee that is ground in
advance loses its flavour and aroma.
5. To stop the coffee grinder, release the pulse button A5. Disconnect the coffee grinder from the power
socket. Make sure that the grinding blade A3 has stopped rotating. Turn the lid A1 anticlockwise
to release it, then take it off. Tip the ground coffee into a suitable container.
6. Clean out the coffee grinder after each use according to the instructions in chapter Cleaning and
maintenance.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SCG 2050RD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SCG 2050RD in the language / languages: English as an attachment in your email.

The manual is 0,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info