Manual Sencor SBU 7790 (page 5 of 6) (English)

758831

Zoom out

Zoom in

1/6

10/2016

- 5 -

EN Super Blender

User'smanual

Prior to using this appliance, please read the user'smanual thoroughly, even in cases,

when one has already familiarised themselves with previous use of similar types of

appliances. Only use the appliance in the manner described in this user'smanual. Keep

this user'smanual in asafe place where it can be easily retrieved for future reference.

We recommend saving the original cardboard box, packaging material, purchase receipt

and responsibility statement of the vendor or warranty card for at least the duration of

the legal liability for unsatisfactory performance or quality. In the event of transportation,

we recommend that you pack the appliance in the original box from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Inner cap

can be used to add ingredients to the blending jar while the blender is running.

A2 Outer lid with hole

After removing the cap, you may add ingredients into the blending jar while

blending or you may use the pusher attachment to speed up the blending process.

A3 2-litre blending jar

it is made from very durable plastic Tritan, which does not absorb avours or odours

and does not contain toxic Bisphenol A.

A4 Six blade assembly

it is an integral part of the blender jar.

A5 Safety mechanism

prevents the blender from being turned on when the blending jar is not correctly

seated on the motor unit.

A6 Silicone pad

A7 Motor unit

A8 Control panel with display

A9 Anti-slip feet

A10 Handle

A11 Pusher attachment

its length is designed in such away that after being inserted into the hole in the

outer lid, it will not come into contact with the blade assembly.

A12 Cleaning brush

B1 Touch button +/– for setting blending time from 5 seconds to 6 minutes

B2 LCD display

shows blending time and speed.

B3 Touch button for setting operating mode “Flour”

B4 Touch button for setting operating mode „Smoothie”

B5 Touch pulse button for running the blender in short bursts at maximum speed

B6 Touch button +/– for setting speed from 1 to 8

B7 Touch button for setting operating mode „Nut milk”

B8 Touch button for setting operating mode “Fruit juice”

B9 Touch button for setting operating mode “Cream soup”

B10 Touch button for setting operating mode „Milkshake”

B11 Touch button START

serves to start the blender.

B12 Touch button POWER

serves to turn the blender on and o or to stop the blender.

PURPOSE OF USE AND APPLIANCE FEATURES

■ This multifunction blender represents a revolutionary solution in food processing.

Within afew short moments you will prepare awhole range of meals and beverages,

such as fresh nutritious drinks, milkshakes, creamy soups, sauces, spreads, blended

baby food; you will grind meat, nuts or grains, or create nut or soya milk, crushed ice or

outstanding creamy ice cream or sorbets.

■ Thanks to its powerful 1 800 W motor, this blender will handle even larger pieces of fruit

and vegetables, including soft kernels and peels. In this way, you will give your body the

valuable nutrients that are found in the pulp, kernels and peels in the form of an easily

digestible nutritious drink without having to laboriously cut the fruit and vegetables

into small pieces in advance. The pusher attachment will make blending large food

pieces easier and will speed up the blending of frozen foods to prevent them from

thawing. The two-part lid enables the addition of ingredients into the blending jar while

blending or the preparation of hot meals in the blending jar thanks to steam release

holes in the lid. Its anti-slip feet provide stability to the blender during its operation.

BEFORE FIRST USE

1. Take the appliance and its accessories out of the packaging materials.

2. Thoroughly wash all parts intended for contact with food, the (inner cap A1, outer lid

A2, blending jar A3 with blade assembly A4, and the pusher attachmentA11, using

warm water and aneutral kitchen detergent. Then rinse them with clean water and dry

thoroughly with ane wiping cloth.

Attention:

When cleaning the blending jar A3, be very careful not to injure yourself on the

sharp edge of the blade assembly A4.

ASSEMBLING AND DISASSEMBLING THE APPLIANCE

1. Before you start assembling or disassembling the appliance, check that the motor unit

A7 is turned o and disconnected from the power socket and that the rotating parts

have come to acomplete stop.

2. Place the motor unit A7 on a stable, even, dry surface, for example on a kitchen

countertop. Seat the blending jar A3 on to the motor unit A7. The blender is equipped

with a safety mechanism A5 that will prevent it from being turned on unless it is

correctly assembled.

3. Place the outer lid A2 on to the blending jar A3 and rmly push it down along its entire

perimeter.

4. Insert the inner cap A1 into the outer lid A2 and turn it all the way clockwise. This will

lock it in place.

5. To disassemble proceed in the reverse sequence.

OPERATING THE APPLIANCE

1. Make sure that the motor unit A7 is turned o and disconnected from the mains power

socket. Place the ingredients that you wish to blend into the blending jar A3. Assemble

the blender according to the instructions in the chapter Assembling and disassembling

the appliance.

Attention:

To achieve optimal results, the blending jar should be lled to at least of

its capacity.

The maximum capacity of the blending jar A3 is 2 litres. Do not ll it past the

maximum mark.

If you wish to blend hot liquids, prepare soya milk or use the pusher attachment

A11 while blending, do not ll the blending jar A3 to more than .

2. Connect the power cord to apower socket. The control panel A8 lights up for ashort

moment. Then the blender switches to stand-by mode. Button B12 starts ashing. To

turn on the blender, press button B12. The preset operating mode touch buttons will

light up and the blending time 00:00 and speed level 4 will appear on the display.

3. To select apreset operating mode, use the touch buttons B3–4 andB7–10. You will nd

an overview of all the operating modes in chapter Quick guide to processing ingredients.

To start the blender, press button B11. In all the operating modes, the blending speed

and duration are automatically regulated. While blending, we recommend to use your

hand to hold down the jar from above. After the preset blending time has elapsed, an

acoustic signal will be made and the blender will automatically stop running. If you wish

to stop the blender sooner, press the button B12. After being idle for two minutes, the

blender will automatically switch to the stand-by mode. The control panel with display

A8 will turn o and the button B12 will start ashing.

4. If you do not wish to take advantage of the available preset modes, you may use buttons

B1 and B6 to set the blending time and speed manually.

5. The pulse button B5 is used for running the blender at maximum speed in short

intervals. The blender will run as long as the button B5 is pushed down. The maximum

continuous operating time in this mode is 1 minute.

6. While blending or after pausing, you may add ingredients into the blending jar A3

through the hole in the lid A2. While blending hot liquids and meals, the inner cap A1

must remain locked in place.

7. If while blending, the ingredients are not circulating inside the blending jar A3, remove

the inner cap A1 and use the pusher attachment A11 to push the ingredients towards

the blade assembly A4. The pusher attachment A11 is designed in such away that after

being inserted into the hole in the outer lid A2, it will not come into contact with the

blade assembly A4. Never put the pusher attachment A11 into the blending jar A3

unless it is closed with the outer lid A2.

Attention:

The maximum operating time is 6 minutes. Then allow it to cool down for 5

minutes. After three consecutive cycles allow the appliance to cool down for

15 minutes.

To avoid overloading the motor, do not use the pusher attachment A11

continuously for longer than 1 minute.

8. If ingredients stick to the blade assembly A4 or the inside walls of the blending

jar A3, switch it o and unplug it from the power supply. Make sure that the blade

assembly A4 has stopped rotating. Carefully remove the blending jar A3 from the

motor unit A7. Take o the lid, and using aplastic spatula, clean the blade assembly

A4 and the walls of the blending jar A3. Put the lid back on and seat the blending

jar A3 back on to the motor unit A7. Plug the power cord into apower socket and

continue blending.

9. After you nish using it, disconnect the blender from the power socket. Check

that the blade assembly A4 has stopped rotating and take the blending jar A3

o the motor unit A7. Use aplastic spatula to remove food from the blending jar

A3. Disassemble and clean the appliance according to the instructions in chapter

Cleaning and maintenance.

BUILT-IN THERMAL FUSE

■ The thermal fuse protects the motor against overheating. If the appliance automatically

turns o during operation, unplug the power cord from the power socket. Take the

blending jar A3 o the motor unit A7 and check that the blade assembly A4 is not

blocked by ingredients inside of the blending jar A3. Wait approximately 15 minutes

until the motor unit A7 cools down. Then you may continue using the blender.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBU 7790 in the language / languages: English as an attachment in your email.

The manual is 0,79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sencor SBU 7790

Sencor SBU 7790 User Manual - Dutch - 6 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SBU 7790 Manual

Product: