Manual Sencor SBS 8800 (page 6 of 7) (English)

760058

Zoom out

Zoom in

1/7

- 6 - 10/2019

EN Bluetooth personal scale

User'manual

■ Prior to using this appliance, please read the user’manual thoroughly, even in cases

where you have previously familiarised yourself with the operation of similar types

of appliances. Only use the appliance in the manner described in this user’manual.

Keep this user’manual in safe place where it can be easily retrieved for future use.

We recommend saving the original cardboard box, packaging material, purchase

receipt and responsibility statement of the vendor or warranty card for at least the

duration of the legal liability for unsatisfactory performance or quality. In the event

of transportation, we recommend that you pack the appliance in the original box

from the manufacturer.

DESCRIPTION OF THE APPLIANCE

A1 Bottom left electrode

A2 Upper left electrode

A3 Scale

A4 Handle

A5 Outer left hand electrode

A6 Inner left hand electrode

A7 Smartphone holder

A8 Inner right hand electrode

A9 Outer right hand electrode

A10 LCD display

A11 Upper right electrode

A12 Lower right electrode

A13 Bluetooth icon

Weight unit selection switch

(located on the underside of the

scale, not shown)

PRINCIPLE OF THE MEASUREMENT OF THE BONE, FAT AND

MUSCLE TISSUE, AND WATER PERCENTAGE SHARE IN THE BODY

■ This personal scale is equipped with function for measuring and analysis of bodily

parameters. Measurement of the bone, fat and muscle tissue, and water percentage

share in the body is based on the bioelectrical impedance analysis (BIA) method.

The BIA method enables the determination of these values on the basis of electrical

resistance of human tissue that is measured using weak electrical impulse. The

percentages are calculated based on differences in the electrical resistance of the

individual tissues. The measured values cannot be added up.

■ The metal electrodes on the scale A3 and on the handle A4 serve to send an electrical

impulse and to sense its response. They are arranged to enable the measuring circuit

to be complete when both hands and feet are standing on the scale.

POWER SOURCE

■ This scale also comes with four type AAA 1.5 alkaline batteries. The batteries are

already installed in the battery compartment located on the underside of the scale,

however, during transport they are protected by an insulating strip to prevent them

from discharging before reaching the end customer and damaging the appliance. To

use the scale, remove the insulating strip.

■ When the LCD display shows “LO”, it is necessary to replace both batteries with new

ones.

■ Remove the battery compartment cover and take out the flat batteries. Insert new

batteries of the same type. Ensure correct polarity as shown at the bottom of the

battery compartment and put on the cover.

USING THE SCALE

■ Place the scale on an even, smooth, hard and stable surface. Do not place it on carpet

or any other soft surface, otherwise the measurement results may be inaccurate.

■ When weighing yourself, stand still and do not lean. In order to collect comparable

results, it is recommended to weigh one’self at the same time of day. The weighing

results may be influenced by various factors, e.g. the clothing that is worn or the food

and drink that you consume before weighing yourself.

■ Measuring weight together with the body parameter analysis must be done

barefoot. Both the feet and hands must be placed on the electrodes.

Weight unit selection

■ The weight unit selection switch is located on the underside of the scale. Select the

required weight unit: kg – lb – st.

Weighing mode

■ The scale is equipped with an auto start function that is activated when the scale

is stepped on. Stand with both feet on to the scale A3 and wait until your current

weight appears on the display A10. The displayed weight will flash once and then

after few moments the scale will turn off automatically.

Weighing mode with measurement and analysis of body parameters

■ In order to perform weighing with measurement and analysis of body parameters,

it is necessary to first install special application on to your smartphone. Proceed

according to the instructions in chapter “Downloading and using the mobile

application” in another part of the user’manual.

1. Insert the smartphone with the installed application into the holder A7 in the

handle A4.

2. Gently tap on the scale A3 to light up the display.

3. Grab the handle A4 with both hands, turn it outwards and pull out the handle A4.

Inside the handle A4 there is slide-out cable system with an automatic wind-up,

which will enable you to slide out and tilt the handle into your required height and

direction.

4. Open the application in your smartphone.

5. Stand on the scale barefoot so that your feet are touching all the electrodes on the

scale A3. Hold the handle A4 with both hands. It is important that your palms are

touching all the electrodes on the handle A4 while having your arms extended at

90 ° angle from your body - see figure B.

6. Wait moment until your weight and the complete body parameter analysis

appears on the display of the smartphone.

7. The data in the application will automatically be assigned to the right person and

saved in the smartphone’memory.

8. The scale will turn off automatically as soon as the weighing process is finished.

9. Carefully step off the scale. Take the smartphone out of the holder A7.

10. Slowly and carefully put the handle A4 downwards towards the scale. The system

will automatically wind the cable into the inner compartment underneath the

handle A4. As soon as the cable is almost wound up, secure the handle A4 in the

scale. Correct attachment is indicated by click.

Warning:

Under no condition drop the handle A4 while standing on or

next to the scale in order to wind cable back up into the scale.

There is risk of injury or damaging the appliance.

Downloading and using the mobile application

■ This scale enables the storing of and searching for measurement results using

mobile application. The measured values are transferred to mobile device using

Bluetooth technology.

1. Downloading the application

You can download the application on to your smartphone using the QR code

below or depending on your operating system, download it from the App Store /

Google Play, app name: “Sencor Health”.

2. Bluetooth settings

Check that you have the Bluetooth function activated – find more information in

the user’manual of your smartphone.

Turn on the scale by taping on it in the middle.

3. Creating new user

Open the application and tap on “Body Monitor”. Stand on the scale.

The connection is successfully completed when the display of the smartphone

shows the same values as shown on the scale.

Tap on “Link” to confirm the connection.

Enter your name and enter the main interface.

4. Using the application with the scale

Open the application and tap on the scale A3 to light up the display.

As soon as the connection is made, the smartphone will show the message “please

step on the scale”.

Step on the scale and weighing will start. Follow the instructions in section

“Weighing mode with measurement and analysis of body parameters”.

After approximately 30 seconds, the weighing and bodily parameter analysis

results will appear on the smartphone’display, and be assigned to the user and

automatically be saved to the smartphone’memory. Additional information is

available directly in the application.

5. System requirements

Bluetooth version: 4.0 and higher

iOS: iPhone 4S and higher, iOS 6.0 and higher

Android: Android 4.3 and higher

iOS

Android

Troubleshooting

■ It is not possible to display the measured date on the smartphone:

– Check that the Bluetooth icon A13 is lit.

– Check that you have activated the Bluetooth function in your smartphone.

– Check that you are within the Bluetooth signal range.

– Reopen the application.

– Turn the Bluetooth function off and then on again, and renew the connection

with the scale.

■ Connection failed.

– Check that only single Bluetooth device is connected to the scale.

– that the Bluetooth version on your device is 4.0 or higher.

■ The display A10 on the scale is off.

– Check that the batteries are not flat and replace them with new ones if necessary.

– Contact an authorised service centre.

Automatic shut off

The scale will turn off when it is idle for longer than several minutes.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBS 8800 in the language / languages: English as an attachment in your email.

The manual is 0,3 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sencor SBS 8800 Manual

Product: