758826

Sencor SBL 3272 Manual

8
Zoom out
Zoom in
Previous page
1/12
Next page
EN-8
EN
Blender
SBL 3271SS / SBL 3272RD
2015 11/2015
Attention:
The safety mechanism will prevent the appliance from being started unless the blending jar or
grinder assembly is properly attached to the motor unit A7.
3.2 To remove the blending jar or grinder from the motor unit A7, proceed in the reverse sequence.
OPERATING THE APPLIANCE
1. Using the blender
1.1 Make sure that the motor unit A7 is turned off and disconnected from the mains power socket.
1.2 Assemble the blender according to the instructions in chapter Assembling and disassembling the
appliance.
1.3 Place the food or pour the liquids that you wish to blend into the blending jar A3. Close the
blending jar A3 using the lid according to the instructions in chapter Assembling and disassembling
the appliance.
Note:
The maximum capacity of the blending jar A3 is 800 ml. We recommend that the blending jar is
not filled with more than 600 ml of liquids. Certain liquids increase their volume during mixing,
and therefore it is better to blend them gradually in smaller batches.
1.4 Connect the power cord to the power socket and set the speed dial A8 to the required speed
level of 1 or 2. Level 1 is slower and level 2 is faster. We recommend to first set the slower speed to
allow the ingredients to mix together. Then you can increase the speed to level 2. While blending,
always use your hand to hold down the lid A2 from above. The pulse level is appropriate when
you wish to blend food only very quickly. To start the pulse level, turn the speed dial A8 to the
position "P" and hold it in this position for a moment. As soon as you release the speed dial A8, it
will automatically return to position 0 (Off).
Attention:
The maximum operating time is 2 minutes. Do not leave the appliance in continuous operation
for longer than indicated above. Then allow the appliance to cool down for 2 minutes. When
processing hard food or liquids with a very thick consistency, do not leave the appliance in
continuous operation for longer than 1 minute.
1.5 While blending, you may add food or liquids to the blending jar A3 through the hole i the lid A2
after removing the inner cap A1.
1.6 In the event that food is sticking to the blade assembly A5 or the walls of the blending jar A3,
turn the appliance off by turning the speed dial to position 0 (Off) and disconnect it from the
power socket. Make sure that the blade assembly A5 has stopped rotating. Carefully remove the
blending jar from the motor unit A7. Take off the lid A2 and using a plastic spatula clean the
blade assembly A5 and the walls of the blending jar A3. Put the lid A2 back on and reattach
the blending jar to the motor unit A7. Plug the power cord into a power socket and continue
blending.
1.7 After you have finished using the appliance, set the speed dial A8 to position 0 (Off) and disconnect
the power cord from the power socket. Check that the blade assembly A5 has stopped rotating
and take the blending jar off the motor unit A7. Use a soft plastic spatula to remove food from
the blending jar A3.
1.8 Disassemble the blending jar according to the instructions contained in chapter Assembling and
disassembling the appliance, and clean it according to the instructions in chapter Cleaning and
maintenance.
2. Using the grinder
2.1 Make sure that the motor unit A7 is turned off and disconnected from the mains power socket.
2.2 Place the food that you wish to grind up into the grinding jar A0. The grinder is suitable for
grinding nuts (with shells removed), coffee beans, spices, etc. The maximum amount of food
that can be placed in the jar A0 is indicated by the MAX mark. Do not overfill the jar A0.
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBL 3272 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBL 3272 in the language / languages: English as an attachment in your email.

The manual is 0,6 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info