758886
3
Zoom out
Zoom in
Previous page
1/8
Next page
- 3 - 10/2019
Copyright © 2019, Fast ČR, a.s.
Attention:
This appliance is not designed to be controlled using
aprogrammed device, external timer switch or remote control.
The appliance is designed for household use only. It is not intended for use
in locations such as:
- staff kitchens in stores, offices and other workplaces;
- hotel or motel rooms and other living areas;
- agricultural farms;
- bed and breakfast establishments
Do not use the appliance in an industrial environment or outdoors or for
purposes other than those for which it is intended.
Do not place the appliance on window sills, kitchen sink drainboards or
unstable surfaces. Always place it on astable, even and dry surface.
Do not place the appliance on an electric or gas stove or in its vicinity, do
not place it in the vicinity of an open fire or an appliance that is asource of
heat.
To prevent potential injury by electrical shock, do not submerge any part of
the appliance in water or any other liquid.
This appliance may only be used with the original grill plates that are
supplied with it. Before attaching the grill plates to the appliance, make
sure that they are completely dry.
Do not use the appliance without the slide-in drip tray and without the grill
plates installed.
During operation there needs to be sufficient area for air circulation above
the appliance and on all its sides. Do not use the appliance near flammable
materials such as curtains, kitchen towels, etc.
Never place food wrapped in aluminium foil or plastic wrap, etc. on to the
grill plates. The appliance is not used for preparing flambéed meals.
Clean the surface of the grill plates after each use, as described in chapter
Maintenance and cleaning.
Always turn off the appliance and disconnect it from the power socket when
leaving it without supervision, after finishing using it and before removing
the grill plates, cleaning or moving it.
Allow the appliance to fully cool down before removing the grill plates,
moving, cleaning or storing it.
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sencor SBG 6231 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sencor SBG 6231 in the language / languages: English as an attachment in your email.

The manual is 0,56 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info