528684
4
Zoom out
Zoom in
Previous page
1/16
Next page
Liquid Crystal Display
(1) b.c. mark (battery check) is
displayed when the meter is
switched on.
(2) Digital value of the measured
F-stop or EV is shown (f/1~
f/90 or EV(- 1) ~ EV25), when
the meter is used in T-priority
mode.
(3) F-stop value is set in F-priority
mode for ambient light
measurement.
(4) E.u. (underexposure) or E.o.
(overexposure) mark is
displayed when the measuring
range is exceeded.
By pressing F/EV key, the indicated
symbol is converted from F to EV,
and vice versa. When the meter is
used in the flash mode, only F mark
is displayed.
When the meter is used in T-priority
mode,
(1) F-stop number is also displayed
in bar-dot symbols at 1/2 F-stop
increments.
(2) The measured F-stop values
are indicated in bar dot symbol
by pressing the memory key
after each measurement. The
number of memorized values is
limited up to 2.
4
(1) Battery capacity is shown when
the meter is switched on.
(2) Bar symbols indicate the
fractions of F-stop or EV value.
(1) Digital value of the measured
shutter speed is shown in this
display (30min. ~ 1/8000sec.),
when the meter is used in
F-priority mode.
(2) Shutter speed is set in T-priority
mode;
for flash light:
1sec. ~ 1/500sec.
for ambient light:
30min. ~ 1/8000sec.
for cine scale:
6fps. ~ 128fps.
Display for film speed moves
through a range of ISO 3 ~ ISO
8000 by pressing either UP or
DOWN key while holding the ISO
key depressed.
This display comes into operation
when the multi-measurement key is
pressed in both modes of wireless
and wired measurement for flash
light. The number of cumulative
flashes is limited up to 9. If it
exceeds 9, the E mark (error) is
indicated.
Any of the following symbols is
displayed depending on the mode
selection.
for wireless (cordless)
measurement for flash light
for wired measurement for
flash light
for cine mode
In case of ambient light
measurement (excepting cine
mode), no symbol mark is
indicated.
5
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-718 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-718 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info