528681

Sekonic L-508 Manual

12
Zoom out
Zoom in
Previous page
1/16
Next page
6. Advanced Functions
1. Memory function
This meter can store up to three measured values in memory for each measurement mode.
(incident light mode, -3 values, reflected light mode, -3 values). This feature can be used in the
following modes: ambient light (shutter speed priority only) EV, flash (with and without cord).
1. Press the Measuring button 19 and take a measure-
ment.
2. Press the Memory button 14 placing the measured
value in memory.
The number of values in memory is displayed on the
LCD. The f stop value corresponding to the measured
value is displayed in the analog section. By repeating
this operation, up to three values can be stored in
memory.
• Memory can be cleared by pressing the Memory clear
button 13 or changing measurement mode.
NOTE:
• The memory function cannot be used in "ambient light aperture priority mode" or "flash
cumulative mode."
• Measured values for the fourth and subsequent times will be displayed but cannot be
stored in memory.
• When the incident / reflected selection dial is moved, the memory remains on the analog
display, but when you press Memory clear button all values in memory are erased.
2.Averaging function
This displays the average of two or three of the values in memory.
1. Press the Measuring button 19 and take a
measurement.
2. Press the Memory button placing the measured value
in memory.
-19-
6. Advanced Functions
3. When the Ave/r EV button 4 is pressed, an average
value for the two or three measurements display on the
LCD. The value in memory and the average values are
displayed on the analog scale. An "A" appears in LCD
to indicate this is an average.
• The average mode can be canceled by pressing the
Ave/
r EV button.
3. Brightness difference function
This function is useful for evaluating studio lighting and checking the evenness of the lighting set-up
across the subject area.
Take a measured value at a certain point as a standard value. The difference between the standard
value and a new measured value is displayed as EV and the f-stop in analog scale.
Example of adjusting lights using brightness measurement with shutter speed priority mode.
1. Turn the Lumisphere UP/DOWN ring 1
to lower it to
the DOWN position.
2. Turn any secondary light source off. Point the
Lumisphere toward the main light source, from the
position of the subject and take a measurement. Press
the Memory button 14
and store the value in memory.
3. Press the Average/
r EV button and display the "A"
mark on the LCD.
-20-
… 12 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sekonic-l-508

Reset search

  • How do i convert EV to LUX or foot candles to see the intensity of each light? I have the tables in the manual, but am unsure how to read them. Any help?? Submitted on 5-4-2022 at 06:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-508 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-508 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-508

Sekonic L-508 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info