528681

Sekonic L-508 Manual

5
Zoom out
Zoom in
Previous page
1/16
Next page
3. Before Using
4. Replacing battery during measurement or when using the memory function
• Always turn the power OFF before replacing batteries. If batteries are removed with the power
ON, measurements and settings in memory can no longer be recalled.
• If after replacing the battery, or during measurements, strange screens (displays that have
not been set) appear in the LCD, or nothing happens, no matter what button is pushed,
remove the battery and wait at least ten seconds and then replace the battery. This allows the
software to automatically reset, and is not a malfunction.
WARNING:
• Never place batteries in fire, short, disassemble, or heat them. The batteries might break
down, and cause an accident, injury or pollute the environment.
5. Auto Power Off function
• To conserve battery power, the meter will turn off about twenty minutes after last use.
• Whether the Auto Power Saving feature turns the power off or the Power button 7 is pressed,
the settings and measured values remain stored in memory. When the Power button is
pressed again the last settings are displayed.
6. Setting main ISO film speed
• Hold down the ISO button 11 and turn the Set/change
dial 5
to select ISO speed for the film being used
.
• You can also change the ISO film speed after taking
measurements. The new value is automatically
displayed.
7. Setting second ISO film speed
• This feature is useful when using a second film with
different ISO speed, using Polaroid
™ proofing film, or
for exposure correction (when using a filter, close-up
photography, etc.).
1. Hold down the ISO 2 button 6 and turn the Set/change
dial to select ISO speed of the film being used.
2. Once this is set, after taking a measurement, the
measured value for the second film speed will be
displayed when the ISO 2 button is depressed.
3. You can also change the second ISO film speed after taking
measurements. The new value is automatically is displayed.
-5-
4. Basic Operation
-6-
… 5 …


Need help? Post your question in this forum.

Forumrules
1

Forum

sekonic-l-508

Reset search

  • How do i convert EV to LUX or foot candles to see the intensity of each light? I have the tables in the manual, but am unsure how to read them. Any help?? Submitted on 5-4-2022 at 06:41

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sekonic L-508 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sekonic L-508 in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Sekonic L-508

Sekonic L-508 Quick start guide - English - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info