●Two timers are available for use either individually or in combination. When used together, Timer 2 starts counting down as soon as Timer
1 has finished counting down the set time. They repeat their respective countdown cycles alternately as many times as necessaryunless
stopped.
●Each Timer 1 and Timer 2 can be set for any desired amount of time from 10 seconds up to 99 hours, 59 minutes and 59 seconds inone-
second increments.
●To use either Timer 1 or Timer 2 as a standard repeat timer, set the timer not in use to “00:00’00.”
●The number of times that the timers repeat their countdown cycles can be set from 1 to 100 times. If “---“ is set for the number of repeating
times, the timers will automatically start over a new counting until stopped by the user.
A
Number of times
the countdown is
to be repeated
B
D
Timer 1
Timer 2
Number of times
the countdown
was repeated
TIMER SETTING
Press to show the TIMER display.
▼
D
BPress and hold for 2 seconds to show the TIMER SETTING display.
▼
CPress repeatedly to select the digits (flashing) to be adjusted.
*The HOUR digits for Timer 1 start flashing.
▼
APress to set the flashing digits.
*The digits move quickly if Button A is kept pressed.
*By pressing Button D while the digits are flashing, both of the timers and the number of times the
countdown is to be repeated will be reset to “00:00'00"” and “001,” respectively.
B
▼
After all the adjustments are completed, press to return to the TIMER display.
C
HOUR
(TIMER 1)MINUTES
(TIMER 1)SECONDS
(TIMER 1)
▼
▼
▼
HOUR
(TIMER 2)
▼
MINUTES
(TIMER 2)
▼
SECONDS
(TIMER 2)
NUMBER OF TIMES THE
COUNTDOWN IS TO BE REPEATED
▼
▼
●
The timers cannot be set for a time less than 10 seconds. If a time less than 10 seconds is set and Button B is pressed to return to the TIMER display, the
timers will automatically be set to “00:00'10".”
How to use the timer
●
To stop the time-up warning beep and time-up beep while sounding, press either Button A, B, C or D. This will not affect the time-up beeps for the subsequent
countdown cycles.
●
The time-up beeps of Timer 1 and Timer 2 sound in different tones.
●
Restarting and stopping the timer can be repeated as many times as necessary by pressing Button C.
Press Button C to start
Timer 1.
C
mark flashes during
the countdown.
A time-up warning beep
for Timer 1 sounds 3
seconds before the set
time is up. When the set
time is up, time-up beep
for Timer 1 sounds for 5
seconds.
TIMER 2 starts
counting down.A time-up warning beep
for Timer 2 sounds 3
seconds before the set
time is up. When the set
time is up, time-up beep
for Timer 2 sounds for 5
seconds.
TIMER 1 starts counting
down.
In this way, both the timers repeat the countdown the number of times you have set,
showing the number of times the countdown has been completed on the display.
ALARM
●The daily alarm sounds once at the designated time (hour, minute) every 24 hours.
●The alarm sounds for approximately 20 seconds at the designated time and automatically stops.
●The alarm can be engaged (on) or disengaged (off) by pressing button C.
●Depending on which indication is selected in the Time/Calendar display, the alarm time is displayed in a 12-hour or 24-hour indication.
A
B
D
Alarm on mark
(when the alarm is
off: --)
Alarm mark
ALARM TIME SETTING
Press to show the ALARM display.
▼
D
BPress and hold for 2 seconds to show the ALARM SETTING display.
*The hour digit starts flashing.
C
ENGAGEMENT/DISENGAGEMENT OF THE DAILY ALARM
CPress to engage (on) or disengage (off) the alarm.
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Seiko S05A at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Seiko S05A in the language / languages: English as an attachment in your email.
The manual is 1,42 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
