757414
19
Zoom out
Zoom in
Previous page
1/21
Next page
01 2
Push the
crown
back in
Adjusting the time and date by receiving a radio signal
“How to conduct manual reception (Receive a radio signal manually)” → P.56
When the watch is unable to receive a radio signal, refer to
“How to manually set the time” → P.59
“How to manually set the date” → P.61
* When the crown is a screw lock type, lock it. → P.13
5When this operation is complete, press
the crown to return.
This ends the preliminary position alignment mode,
and the seconds hand, and hours and minute
hands start to move.
When the watch returns to the time display mode,
check if the time and date are correct.
If the time and date are not correct, manually set
them.
EN 68
7
TROUBLESHOOTING
Troubleshooting
At trouble Possible causes Solutions
Reference
Hand
Movement
The seconds hand moves
at two-second intervals.
The energy depletion forewarning
function is activated. (P.36)
If the seconds hand moves at two- or
five-second intervals while you wear
the watch everyday, the watch is in a
condition where it cannot acquire
sufficient light, for instance, the watch
is concealed under a long sleeve shirt.
Fully charge the watch so that the
seconds hand may move at one-second
intervals.
Be careful not to conceal the watch
under a sleeve, etc., while wearing it.
When taking off the watch, place it in as
bright a location as possible.
P.34
The seconds hand moves
at five-second intervals.
The stopped seconds
hand pointing to the
15-second position
started operating.
The power save function has been
activated. (P.37)
When the watch is not exposed to
adequate light for a certain period of
time, the power save function to limit
energy consumption is automatically
activated.
Wait until the current time is displayed.
No operation is needed. (This is not a
malfunction.)
-
EN 69
7
TROUBLESHOOTING
At trouble Possible causes Solutions
Reference
Hand
Movement
The stopped seconds
hand pointing to the
45-second position
started operating.
The power save function has been
activated. (P.37)
When the watch is not exposed to
adequate light for a certain period of
time, the power save function to limit
energy consumption is automatically
activated.
1.
Fully charge the watch so that
the seconds hand may move at
one-second intervals.
2.
After that, if the watch displays
the incorrect time, receive a
radio wave as needed.
P.17,
P.34
The watch hands advance
rapidly unless a button is
pressed. After the rapid
advancement is
completed, the watch
resumes its normal
movement.
The power save function has been
activated. (P.37)
The automatic hand position alignment
function was activated. (P.64)
When the hand positions deviate to
display incorrect time as a result of
external influences, etc., the watch
automatically corrects the hand
misalignment by the automatic hand
position alignment function.
No operation is needed. (This is not a
malfunction.) -
EN 70
7
TROUBLESHOOTING
At trouble Possible causes Solutions
Reference
Reception
of a radio
signal
The watch is unable to
receive a radio signal.
The reception results have
failed and the seconds
hand points to N (the watch
does not receive a radio
signal).
The watch was moved while it was
receiving a radio signal.
(It takes 12 minutes at the longest to
receive a radio signal successfully.)
Do not move the watch while it is
receiving a radio signal.
Because it takes time to receive a radio
signal successfully, leave the watch
untouched for 12 minutes at the longest.
P.23,
P.57
The watch was left where the radio
signal was weak or where it was unable
to receive a radio signal. (P.24)
Place the watch where it is able to easily
receive a radio signal. P.23
Transmitting stations may have
stopped transmitting radio signals for
some reason. (Transmission stop)
Check the website of each transmitting
station for further information
concerning a transmission stop.
Attempt to receive a radio signal again
after a while.
P.25
The time difference is set to regions
other than the radio signal reception
ranges.
1. Check the set time difference and
set the correct time difference.
2. When the watch is not displaying the
precise time, receive a radio signal
again if necessary.
P.17,
P.29
EN 71
7
TROUBLESHOOTING
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 7B72 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 7B72 in the language / languages: English as an attachment in your email.

The manual is 2,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info