757377

Seiko 6R31 Manual

12
Zoom out
Zoom in
Previous page
1/13
Next page
Accuracy of mechanical watches
○The accuracy of mechanical watches is indicated by the “daily rate.”
○The accuracy of mechanical watches may not fall within the specified
range of time accuracy because loss/gain changes according to the
position of the watch, which is dependent on the conditions of use,
such as the length of time during which the watch is worn on the wrist,
arm movement, and whether the mainspring is wound up fully or not,
etc.
○The loss/gain of mechanical watches is not measured by a daily rate,
but by daily rates of one week or so.
○Accuracy variation according to temperature
The parts that compose the accuracy of mechanical watches are made of metals. It is well known that
metals expand or contract depending on temperatures due to metal properties. This exerts an effect on the
accuracy of the watches. Mechanical watches tend to lose time at high temperatures while they tend to
gain time at low temperatures.
EN 41
2
TO PRESERVE THE QUALITY OF YOUR WATCH
○Mainspring wound condition and accuracy
In order to improve accuracy, it is important to regularly supply energy to the balance that controls the speed
of the gears. The driving force of the mainspring that powers mechanical watches varies between when
fully wound and immediately before it is unwound. As the mainspring unwinds, the force weakens.
Relatively steady accuracy can be obtained by wearing the watch on the wrist frequently for the self-winding
type and winding up the mainspring fully everyday at a fixed time to move it regularly for the wind-up
mechanical type.
○Effect of magnetism
When affected by a strong magnetism from outside, the mechanical watch may lose/gain time temporarily.
The parts of the watch may become magnetized depending on the extent of the effect.
In such a case, consult the retailer from whom the watch was purchased since the watch requires repair
including demagnetizing.
EN 42
2
TO PRESERVE THE QUALITY OF YOUR WATCH
Troubleshooting
Troubles Possible causes Solutions
The watch stops
operating. The mainspring has not been wound.
Wind up the watch as per “How to wind the
mainspring” → (P.11), and set the time. If the
watch still does not operate, consult the
retailer from whom the watch was purchased.
The watch temporarily
gains/loses time.
The watch has been left in extremely high or
low temperatures for a long time.
Return the watch to a normal temperature so
that it works accurately as usual, and then
reset the time. The watch has been adjusted
so that it works accurately when it is worn on
your wrist under a normal temperature range
between 5°C and 35°C.
The watch has been left close to an object
with a strong magnetic field.
Correct this condition by moving and keeping
the watch away from the magnetic source,
and reset the time. If this action does not
correct the condition, contact the retailer from
whom the watch was purchased.
You drop the watch, hit it against a hard
surface, or wear it while playing active sports.
The watch is exposed to strong vibrations.
If accuracy does not return after setting the
time, consult the retailer from whom the watch
was purchased.
The watch has not been overhauled for more
than 3 years.
Consult the retailer from whom the watch was
purchased.
EN 43
2
TO PRESERVE THE QUALITY OF YOUR WATCH
Troubles Possible causes Solutions
The date changes at
12 o’clock noon. AM/PM is not properly set. Advance the hands by 12 hours.
Blur in the display
persists.
A small amount of water has got inside the
watch due to deterioration of the gasket, etc.
Consult the retailer from whom the watch was
purchased.
* For a solution to a problem other than listed above, contact the retailer from whom the watch was purchased.
EN 44
2
TO PRESERVE THE QUALITY OF YOUR WATCH
… 12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Seiko 6R31 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Seiko 6R31 in the language / languages: English as an attachment in your email.

The manual is 0,96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Seiko 6R31

Seiko 6R31 User Manual - German - 12 pages

Seiko 6R31 User Manual - Dutch - 21 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info