788845
19
Zoom out
Zoom in
Previous page
1/20
Next page
12
After use
1. After use, switch the appliance off.
To prolong the service life of the appliance, we recommend setting
the rotary switch to the lowest setting for few seconds first before
turning it all the way back to .
2. Unplug the mains plug from the wall socket.
3. Place the appliance with the bristles facing upwards onto a heat-
resistant mat or surface and leave the appliance to cool down fully.
Ensure that no one accidentally touches the hot parts while the
appliance is cooling down!
4. If necessary, clean the appliance before storing it away.
In particular, remove any remaining hair from the brush head
so as not to block the air flow openings.
Styling your hair
As your hair comes into contact with very high temperatures
when being styled, keep the following in mind:
When choosing a shampoo or other hair care products, check
that they will moisturise your hair.
Use a heat protection product before styling your hair, especially
if you are straightening it. Suitable products are available from
your hairdresser or from a health and beauty retailer.
Do not use any other styling products before styling your hair
with the heated bristles.
The lighter, thinner or more sensitive the hair is, the lower the
temperature should be to protect the hair. This also applies
to bleached or coloured hair. Very thick, curly hair is less heat-
sensitive and can withstand higher temperatures.
9
WARNING – fire hazard
The bristles on the appliance become very hot. When
taking a break from styling and after use, put the
appliance down somewhere where the hot bristles are
not touching any flammable objects until they have
cooled down sufficiently. Ensure that any surface on
which the appliance is placed is heat-resistant.
Never leave the appliance unattended while switched
on or when it is heating up or cooling down.
Do not cover the appliance (e.g. with a towel) while
it is switched on or while the bristles are still hot.
The air intake grille must not be covered. Make sure
that the air intake grille is not covered by your hair
or fingers and that no fluff or hair is trapped inside.
CAUTION – material damage
Do not use the appliance on artificial hair.
This can melt when heated and damage the appliance.
Do not use any caustic or abrasive products, or hard
brushes, etc. for cleaning. Make sure that no moisture
gets into the appliance while cleaning it.
117102 en Heissluftbuerste_100x150_v2.indd Druckbogen 9 von 10 - Seiten (12, 9)117102 en Heissluftbuerste_100x150_v2.indd Druckbogen 9 von 10 - Seiten (12, 9) 26.08.21 11:0726.08.21 11:07
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEG HB 926 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEG HB 926 in the language / languages: English, German as an attachment in your email.

The manual is 0.96 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info