671272
11
Zoom out
Zoom in
Previous page
1/12
Next page
37
20
40
37
41
41
16
42
17
4547
Den Hospital-Grade-Filter E (37) er-
reichen Sie auf der Unterseite des
Gerätes. Dazu die Rasten (40) der Fil-
terabdeckung (20) zusammen drük-
ken und diese herausziehen. Der Hos-
pital-Grade-Filter E (37) ist wie eine
Filtertüte geformt und ist flach auf
der Geräteunterseite verstaut. Zum
Wechseln muss dieser aus dem Gerät
herausgezogen werden. Die Dichtung
des Filters kann nun mit Hilfe der Fil-
terrasten (41) von der Ausblasöffnung
gezogen werden. Hier werden diese
gleichzeitig nach innen gedrückt und
der Filter kann herausgezogen wer-
den. Beim Einlegen des neuen Hospi-
tal-Grade-Filters E (37) wird zunächst
die Dichtung auf die Ausblasöffnung
geschoben (Auf Codierung achten!)
und die Filterrasten links und rechts
mit einem Klick eingerastet. Der Fil-
ter wird anschließend wieder auf der
Unterseite des Gerätes verstaut und
die Filterabdeckung wieder einge-
setzt.
Airbelt Stoßschutz
Ihr neuer SEBO Bodenstaubsauger ist
mit dem einzigartigen, patentierten
Airbelt
TM
Stoßschutz (21) ausgestattet,
der Ihr Mobiliar vor Beschädigungen
schützt. Er sorgt auch dafür, dass die
gefilterte Luft rundum besonders lei-
se und sanft wieder ausgeblasen wird.
Zum Wechseln des Airbelts (21) die
Polsterdüse (16) aus der Aufnahme
(42) nehmen und diese mit einem
Schlitz-Schraubendreher heraushe-
beln. Anschließend den Airbelt (21)
mit dem Schraubendreher aus der
Verrastung seitlich weg hebeln und
nach vorn schieben. Die alte Stoffab-
deckung entfernen. Beim Aufziehen
der neuen Stoffabdeckung darauf
achten, dass die Verstärkungsstrei-
fen unterschiedliche Längen haben.
Der obere Verstärkungsstreifen ist
mit einer Codierung (47) versehen
und muss auf der Seite TOP“ (45) in
die Nute eingeführt werden. Anschlie-
ßend den Airbelt wieder auf das Ge-
rät schieben und einrasten. Dann die
Düsenaufnahme auf der Rückseite
einschieben und an der unteren Sei-
te einrasten. Zum Schluss kann die
Polsterdüse wieder in die Aufnahme
geklickt werden.
To change the Hospital-Grade-Filter
(37), first remove the exhaust filter
cover (20) from the bottom of the ma-
chine by pressing together both the
release buttons (40) in the cover (20).
Next, pull the fleece material part of
the filter out of the machine. Finally
press the latches (41) on either side of
the filter inward and pull out the filter.
To insert the new Hospital-Grade-Fil-
ter (37) put the seal of the filter open-
ing over the exhaust opening of the
housing (please note the alignment
tab goes at the bottom). The latches
(41) on the right and left side should
click shut to hold the filter in place.
Push in the fleece material and shut
the filter cover.
Airbelt Bumper System
Your new vacuum cleaner is fitted with
the patented Airbelt
TM
(21) shock ab-
sorber system, which protects your
walls and furniture and eliminates ex-
haust air blast.
The outer cloth of the Airbelt
TM
can
be changed, if necessary. Remove
the upholstery nozzle (16). To lever
out the upholstery nozzle holder (42)
please use a slotted screw driver. The
cloth covered Airbelt
TM
assembly can
be levered out of the recess with a
screw driver and removed by carefully
sliding the assembly forwards.
To fit the Airbelt-cloth cover over the
Airbelt
TM
insert the side rails into the
grooves on the Airbelt
TM
. Please note
that the upper side rail comes with a
marking code (47). Please insert this
upper side rail into the groove which
is marked “TOP” (45).
Start from one end and continue
around the Airbelt
TM
. The new cloth
covered Airbelt
TM.
assembly is fitted
from the front of the machine. Press
on and engage.
Now refit the upholstery nozzle holder
under the parking groove (17) and lock
it on the lower side. Finally insert the
upholstery nozzle.
21
11
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sebo E1 PLUS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sebo E1 PLUS in the language / languages: English, German as an attachment in your email.

The manual is 1,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info