671277

Sebo D2 TITAN ECO Manual

13
Zoom out
Zoom in
Previous page
1/15
Next page
CLOG REMOVAL
13
N
OTE! D4 users with ET-1 or ET-2 power heads, please refer to your power head
user’s manual for more detailed instructions for removing clogs in your power head.
If the “bag full or clog” warning indicator (12) remains orange after the filter bag has
b
een changed and the filters are in good condition, there is likely a clog in the sys-
tem.
Clogs in the Head or Brush - Figure 32
Clogs in the swivel neck (57) of a head or brush can be cleared by first pressing the tool
release button (9) and removing the brush or head. Check inside the swivel neck chan-
nel (58), and clean out pathway.
Clogs in the Telescopic Tube - Figure 33
Remove head from telescopic tube (5) by pushing the tool release button (9) and pulling
the tube out. Remove the handle grip (1) from the top of the telescopic tube by pushing
the tube release button (3). A stiff wire or stick can be used to push the clog out of the
tube.
Clogs in the Hose - Figures 33, 34, 35 & 36
Check for suction at the end of the hose by removing the handle grip (1) from the tele-
scopic tube (5) and putting your hand over the handle grip suction opening (59). Turn
the power on and slide the suction up to full power. If you feel reduced suction, the
blockage is in the hose.
If the blockage is in the hose, there are two ways to clear it:
1. With the telescopic tube disconnected from the handle grip (1), hold the hose upright
with one hand blocking the handle grip suction opening (59) and switch on the machine
with full suction power. If necessary, quickly lift your hand on and off the end of the
hose. If that does not clear the clog, you may also clear clogs by reversing the hose -
see #2 below.
2. With the power off, remove the hose neck (#14, figure 34) from the suction opening
(19) by squeezing the two release buttons (13). Remove the handle grip (1) from the tel-
escopic tube (figure 35) and insert the handle end of the hose (1) into the suction open-
ing (figure 36). Note: the handle will not fit snugly into the suction opening. Then, hold
the hose upright with one hand blocking the hose neck end and switch on the machine
at full suction power. If necessary, quickly lift your hand on and off the neck end of the
hose (figure 36). After the clog is removed, replace the hose in the correct position.
Note! Do not insert a wire or stick into the hose. Doing so may cause damage to the
hose.
Clogs in Entrance to Filter Bag - Figure 37
Remove hose neck (14) from vacuum cleaner (see figure 34), open
the filter bag cover (see page 11) and clean out entrance to bag (60).
Figure 34
Always switch off power and unplug vacuum from outlet
before removing any clogs!
!
Figure 32
57
9
Figure 36
14
1
13
19
58
Figure 33
5
9
3
1
11
1
5
3
59
Figure 35
Figure 37
13
5
60
… 13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sebo D2 TITAN ECO at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sebo D2 TITAN ECO in the language / languages: English as an attachment in your email.

The manual is 3,42 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info