634236
10
Zoom out
Zoom in
Previous page
1/13
Next page
display will flash. This "missing echo" indication will
continue until a satisfactory echo has been obtained
from the sounder. The minimum reading on the
repeat meter is 0.8 metres (or 2.7 feet) and has
been
set by a bubble suppression circuit. This is to prevent
false readings which could be caused by aeration at
the interface between boat and water.
GUARANTEE AND SERVICE
The Seafarer 5 and 700 are fully guaranteed under
the conditions as stated on the guarantee card
supplied with the instrument. After the guarantee
expires, or if problems arise which are not covered by
the terms of the guarantee, your instrument will be
repaired in the United Kingdom by the
manufacturers or by one of their officially authorised
main distributors.
Unauthorised or inexperienced
persons should not attempt to service the instrument
since this is not only likely to worsen whatever fault
has arisen, but will immediately nullify the
Guarantee. Should it ever be necessary to return the
i
nstrument for service it is essential that the internal
battery be removed and that the instrument be
carefully packed and insured for transit. A brief note
giving your name and address) and the symptoms of
allure is of great assistance to service engineers in
l
ocating a fault.
Routine Maintenance
The transducer should be examined periodically and
if fitted outside the hull a thin coat of hard anti-
fouling paint should be applied to the face of the
transducer with a soft brush, care being taken not to
9
trap air bubbles under the paint. A build-up of
barnacles and other marine encrustation on the face
of the transducer will cause progressive deterioration
of the instrument maximum depth capability.
Barnacles should be removed by crushing between a
pair of pliers and not tugged off as the transducer
£ace may become irreparably damaged. Particles of
i
mbedded shell can be dissolved by applying a 20%
solution of dilute hydrochloric acid, and be rinsed off
with fresh water. If an internal battery is fitted, this
should he examined periodically for acid leakage and
replaced as necessary. The battery should he
removed if the instrument is not used for an extended
period.
The transducer co-axial plug and socket
connections should be kept clean and protected
against sea water. The transducer cable should be
examined periodically for damage, particularly
where the cable emerges from the plastic transducer
stem.
The instrument should be carefully protected at all
times from salt water and the seals examined to
ensure that water is not allowed to penetrate the
i
nstrument.
Accessories and Spares
Additional or spare transducers as well as automatic
change-over, switches, repeat meters, mounting
brackets and visors are always readily available from
Yacht Chandlers, Dealers or Boatyards.
If you encounter a supply problem, please contact
Seafarer Navigation International Limited directly.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SEAFARER 5 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SEAFARER 5 in the language / languages: English as an attachment in your email.

The manual is 0,89 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info