779961
4
Zoom out
Zoom in
Previous page
1/10
Next page
ENGLISHENGLISH
IMPORTANT!
SCOTT Genius is designed around the BOOST platform so many of the fitted parts:
cranks/wheels/dropouts/forks differ from traditional cycle parts. Always consult your
authorized SCOTT dealer for advice on replacing or repairing any part of your SCOTT bike!
TWINLOC
The TWINLOC system offers simultaneous control of the front and rear shocks with a single
lever allowing the ride of the bike to be adjusted at the flick of a finger.
The 3 basic functions of TWINLOC system are:
-Climb-out Mode: Climb rear / climb front
-Traction Mode: Traction mode rear / platform mode front (where applicable)
-Descent Mode: Full travel rear / full travel front
You can only assemble the “standard” TWINLOC remote lever in “left side upward position”
on the handlebar (this is usually fitted on bikes with x2 front chainrings.)
On bikes with x1 chainring on the front the under bar TWINLOC remote lever in “left side
downward” position can be fitted as standard.
It is possible to change the TWINLOC lever to the underbar option if the bikes gears have
been changed to x1 system, a new alternative lever will be required for this adjustment;
please consult your local SCOTT dealer for more information on obtaining the correct lever
for your bike.
There are 3 positions of the TWINLOC remote lever.
1. CLIMB MODE:
The shock is nearly locked; climbing on asphalt roads is now possible with little power loss.
A simultaneous blow-off-system prevents the shock being damaged in case the rider does
not open the system while crossing obstacles.
2. TRACTION MODE:
By reducing the internal chamber volume inside the shock the travel of the shock will
be reduced, the characteristic of the air spring gets harder this results in climbing with
reduced “bobbing” and offers still optimum traction of the rear wheel.
3. DESCENT MODE:
Full travel of the front and rear shocks.
You will find the following positions on the remote lever:
BASIC SET-UP OF SHOCK & FORKS
Recommended tools for the shock setup:
-The SAG tool that came with your bike.
-A shock pump with a dial up to 20bars/300psi with a special air valve connector (not
supplied with this bike), this will help stop air from escaping while removing the pump
from the shock valve.
Please note that air will flow into the hose and indicator when counterchecking the air
pressure, this will give the appearance that the shock has less air pressure then it was setup,
your shock may need to be adjusted once this action is made.
Please also note that the indicators of shock pumps have a tolerance of max. 10%.
For bikes spec’d with Fox shock and forks:
You can find more specific information about Fox set up on Fox’s website, please use your
fork/shock ID number to find more useful setup tips for your exact fork and shock (please
visit: ridefox.com)
07 |
BIKE USER MANUAL | GENIUSGENIUS | BIKE USER MANUAL
| 06
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scott Genius 2018 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scott Genius 2018 in the language / languages: English as an attachment in your email.

The manual is 1.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scott Genius 2018

Scott Genius 2018 User Manual - German - 10 pages

Scott Genius 2018 User Manual - French - 10 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info