671374
24
Zoom out
Zoom in
Previous page
1/28
Next page
24
TROUBLESHOOTINg
Condition/Problem Things to Check Solution
No display/partial display/
unit will not turn on
If bike has AC adapter, check
electrical (wall) outlet
Make sure unit is plugged into a functioning wall outlet.
If bike has AC adapter, check
connection at unit
Connection should be secure and undamaged. Replace
adapter or connection at unit if either are damaged.
If bike has batteries, check
Battery Indicator on console
or check batteries.
Replace the batteries. It may be necessary to replace the
batteries although the Battery Indicator is not on.
Check data cable integrity All wires in cable should be intact. If any are visibly crimped
or cut, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into
place.
Check console display for
damage
Check for visual sign that console display is cracked or
otherwise damaged. Replace Console if damaged.
ConsoleDisplay If Console only has partial display and all connections are
fine, replace the Console.
If the above steps do not resolve the problem, contact
Customer Care for further assistance.
Unit operates but Contact
HR not displayed
HR cable connection at
Console
Be sure cable is connected securely to Console.
Sensor grip Be sure hands are centered on HR sensors. Hands must
be kept still with relatively equal pressure applied to each
side.
Dryorcallousedhands Sensors may have difficulty with dried out or calloused
hands. A conductive electrode cream (heart rate cream)
can help make better conduct. This is available on the web
or at medical or some larger fitness stores.
Handlebars If tests reveal no other issues, Handlebars should be
replaced.
Console displays “E2” error
code
Check data cable integrity All wires in cable should be intact. If any are cut or
crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into
place.
Console electronics If tests reveal no other issues, Console should be replaced.
No speed/RPM reading,
Console displays “E3” error
code
Check data cable integrity All wires in cable should be intact. If any are cut or
crimped, replace cable.
Check data cable
connections/orientation
Be sure cable is connected securely and oriented properly.
Small latch on connector should line up and snap into
place.
Check magnet position
(requires shroud removal)
Magnet should be in place on pulley.
Check RPM Sensor (requires
shroud removal)
RPM sensor should be aligned with magnet and
connected to data cable. Realign sensor if necessary.
Replace if there is any damage to the sensor or the
connecting wire.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schwinn A10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schwinn A10 in the language / languages: English as an attachment in your email.

The manual is 9,39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Schwinn A10

Schwinn A10 Installation Guide - English - 10 pages

Schwinn A10 User Manual - English - 16 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info