Manual Scheppach GRS1600 (page 5 of 42) (All languages)

644547

Zoom out

Zoom in

1/42

english 7

in a legible state.

• Even for the least displacement, pull the power sup-

ply plug. Reconnect the sifter to the power correctly as

soon as it has been installed at the new place.

• When loading the sifter with soil, do not introduce the

shovel into the rotating drum.

m Use as authorized

The machine complies with the valid EC machine guideline.

• The sifter has been built using modern technology in

accordance with recognized safety rules. Some remain-

ing hazards, however, may still exist causing injuries to

the operator or third persons, or causing damage to the

sifter or other objects.

• Only use the sifter in technically perfect condition, and

only as authorized, being conscious of the risks and fol-

lowing the instructions given in this manual. Have any

defects impairing your safety repaired immediately.

• The roller sieve has been designed for sieving compost,

gar den soil, cloddy sand, or mixing different kinds of

soil.

• Carefully observe the instructions regarding safety, set-

ting up, electrical installation, and maintenance.

• Relevant accident prevention regulations and other,

generally recognized safety-technical rules must also

be adhered to.

• The sifter may only be used, maintained, and operated

by persons familiar with it and instructed in its opera-

tion and procedures. Arbitrary alterations to the imple-

ment release the manufacturer from all responsibility

for any resulting damages.

• The sifter may only be used with original accessories

and tools made by the manufacturer.

• Any other use exceeds authorization. The manufacturer

is not responsible for any damages resulting from un-

authorized use; risk is the sole responsibility of the

operator.

Assembly

Assembly tools

2 fork wrenches size 13

2 fork wrenches size 17 (not included in the shipment).

For reasons of packing, your GRS1600 is not completely

assembled.

Roller sieve, frame arms, Fig. 1

Attach the frame arms to the pre-assembled roller sieve.

2 spacer pins

4 serrated lock washers

4 hexagon nuts

1 hexagon bolt

1 small washer

1 hexagon nut

Frame struts, frame wall, Fig. 2

Assemble frame struts and frame wall.

6 hexagon bolts

6 washers

6 serrated lock washers

6 hexagon nuts

Mind the correct diagonal-cut strut position.

Supporting legs, Fig. 3

Attach the supporting legs to the frame struts.

2 hexagon bolts each

2 serrated lock washers each

2 hexagon nuts each

Wheels, Fig. 4

Fit the wheels to the frame struts.

1 cheese-head screw each

1 washer each

1 bush each

2 hexagon nuts each

When reversing and tightening the hexagon nuts, make

sure the wheels turn easily.

Fit the lower bolts into the frame wall.

2 hexagon bolts

2 washers

2 serrated lock washers

2 hexagon nuts

Frame arms, frame struts, Fig. 5

Bolt together frame arms, frame struts, gusset plates and

the transport bow.

6 hexagon bolts

8 serrated lock washers

6 hexagon nuts

2 hexagon bolts

Fasten the gusset plate with the cable clamp at the front

right side.

Sieve drum insert

The drum remains attached to the frame.

Remove the drum bars ﬁtted to the drum inside in longi-

tudinal direction. For the following remounting, mark the

position of the drum bars with a felt pen.

Fig. 6

Place the sieve insert into the sieve drum in such a way

that the sieve edge is covered by a drum bar.

Push the rings at front and back into the sieve drum and

put them into a vertical position in the drum.

Fig. 7

Bolt the rings through the sieve mashes.

3 Allen screws each

3 washers each

3 serrated lock washers each

3 hexagon nuts each

Continue mounting both drum bars at the points earlier

marked with a felt pen.

m Putting into operation

Fig. 8

Soil is always ﬁlled into the drum from the front.

Before putting the implement into operation, observe the

safety instructions.

All guards and safety devices must be ﬁtted.

After connection to the electrical power, your GRS1600 is

ready for service.

Always attach the power cable to the clamp in the gusset

plate.

Setting up, Fig. 9

Depending on the place of setting up, incline the sieve

drum as required. Displace the hexagon bolt (arrow).

The degree of inclination depends on the type of soil to

be sieved.

For loose material we recommend more inclination, and

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach GRS1600 in the language / languages: All languages as an attachment in your email.

The manual is 0,36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach GRS1600 Manual

Product: