Manual Scheppach DP19Vario (page 22 of 148) (English, German, French, Italian, Polish)

781654

Zoom out

Zoom in

1/148

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

22 | GB

We accept no liability for damage or accidents which

arise due to non-observance of these instructions

and the safety information.

2. Device description (g. 1-2)

1. Machine foot

2. Column

3. Clamping handle

4. Drilling table

5. Motor

6. Speed adjustment lever (handle)

7. V-belt cover

8. Digital display

9. On and off switch

10. Handle

11. Folding swarf protector

12. Drill chuck (illustration may differ)

13. Machine head

14. On and off switch laser

15. Depth indicator with stop

16. Crank handle

17. Hexagonal screw

A. Allen wrench 4 mm

B. Allen wrench 3 mm

C. Battery

3. Scope of delivery

• Machine foot 1x

• Column 1x

• Clamping handle 1x

• Drilling table 1x

• Speed adjustment lever (handle) 1x

• Handle 3x

• Folding swarf protector 1x

• Drill chuck 1x

• Machine head 1x

• Crank handle 1x

• Hexagonal screw 4x

• Battery 2x

• Allen wrench 2x

4. Proper use

The bench drill is designed for drilling in metal, wood,

plastic and tiles. Straight shank drills with a drilling

diameter from 3 mm to 16 mm can be used. The

device is intended to be used by do-it-yourselfers.

It was not designed for heavy commercial use. The

tool is not to be used by persons under the age of 16.

Children over the age of 16 may use the tool except

under supervision. The manufacturer is not liable for

damage caused by an improper use or incorrect op-

eration of this device.

1. Introduction

Manufacturer:

scheppach Fabrikation von

Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

We hope your new tool brings you much enjoyment

and success.

NOTE:

In accordance with the applicable product liability

laws, the manufacturer of this device assumes no

liability for damage to the device or caused by the

device arising from:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions package

with the machine at all times and store it in a plastic

cover to protect it from dirt and moisture. Read the in-

struction manual each time before operating the ma-

chine and carefully follow its information. The machine

can only be operated by persons who were instructed

concerning the operation of the machine and who are

informed about the associated dangers. The minimum

age requirement must be complied with.

In addition to the safety notices contained in this

operating manual and the particular instructions for

your country, the generally recognised technical reg-

ulations for the operation of identical devices must

be complied with.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DP19Vario in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 7.17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DP19Vario Manual

Product: