Manual Scheppach DP16SL (page 5 of 168) (English, German, French, Italian, Polish, Swedish, Norwegian)

781652

Zoom out

Zoom in

1/168

Fabricant:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Cher client,

Nous vous souhaitons beaucoup de plaisir et de succès

pour le travail avec votre nouvelle machine scheppach.

Remarque

Conformément à la loi relative à la sécurité des produ-

its en vigueur, le fabricant de cette machine n’est pas

responsable des dommages causés à la machine ou

par la machine, dans les cas suivants:

• Manipulation inappropriée

• Non observation des instructions d’utilisation,

• Réparations effectuées par des tiers, des professi-

onnels non habilités,

• Montage et remplacement avec des pièces de re-

change qui ne sont pas d’origine,

• «Utilisation non-conforme»

• Défaillances de l’installation électrique en cas de

non-observation des prescriptions électriques et des

spécications VDE 0100, DIN 57113 / VDE0113.

Avertissement

Utilisez un conducteur de protection an d’éviter les

dommages électriques, risques d’incendie ou dom-

mages aux outils.

Votre perceuse a été conçue pour fonctionner avec

une alimentation de 230 V, raccordez-la exclusivement

à un réseau en 230 V. Utilisez un fusible de 15 A ou

un sectionneur. An d’éviter les électrocutions ou un

incendie, remplacez immédiatement un câble endom-

magé ou usé.

Nous vous recommandons:

Avant le montage et la mise en service, lire le texte

complet des instructions d’utilisation. Ces instructions

d’utilisation doivent vous permettre de vous familiari-

ser avec votre machine et d’apprendre à vous servir

de toutes les possibilités d’utilisation conformément à

l’usage prévu.

Les instructions d’utilisation contiennent d’importantes

informations sur la façon d’utiliser votre machine de

façon sûre, appropriée et rentable, et sur la manière

d’éviter les dangers, d’économiser les coûts de répa-

ration, de réduire les temps d’arrêt et d’augmenter la

abilité et la durée de vie de la machine.

En plus des prescriptions de sécurité des présentes

instructions d’utilisation, vous êtes tenu de vous confor-

mer aux réglemetations en vigueur dans votre pays et

qui s »appliquent à l’utilisation de la machine.

Conserver les instructions d’utilisation toujours à

proximité immédiate de la machine, dans une enve-

loppe plastique pour les protéger des salissures et de

l’humidité. Elles doivent être lues et minutieusement

suivies par tous les opérateurs de la machine avant de

commencer à travailler. Seules des personnes ayant

reçu une formation pour l’utilisation de la machine et

qui sont informées des risques associés sont autori-

sées à utiliser la machine. L’âge minimal exigé doit être

respecté.

Outre les consignes de sécurité des présentes instruc-

tions d’utilisation et des prescriptions particulières de

votre pays, il y a lieu de respecter toutes les règles

techniques reconnues comme telles pour l’utilisation

des machines.

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

We wish you a pleasant and successful working expe-

rience with your new machine.

Note

According to the applicable product liability law the ma-

nufacturer of this device is not liable for damages which

arise on or in connection with this device in case of:

• improper handling,

• non-compliance with the instructions for use,

• repairs by third party, non authorized skilled workers,

• installation and replacement of non-original spare

parts,

• improper use,

• failures of the electrical system due to the non-

compliance with the electrical specications and the

VDE 0100, DIN 57113 / VDE 0113 regulations

Warning

To avoid electrical hazards, re hazards, or damage to

the tool, use proper circuit protection.

Your drill press is wired at the factory for 230 V operati-

on. Connect to a 230 V, 15 amp branch circuit and use

a 15 amp time delay fuse or circuit breaker. To avoid

shock or re, replace power cord immediately if it is

worn, cut or damaged in any way.

Recommendations:

Read the entire text of the operating instructions prior

to the assembly and operation of the device. These

operating instructions are intended to make it easier

for you to get familiar with your device and utilize its

intended possibilities of use. The operating instructions

contain important notes on how to work safely, properly

and economically with your machine and how to avoid

dangers, save repair costs, reduce downtime, and

increase the reliability and working life of the machine.

In addition to the safety regulations contained herein,

you must in any case comply with the applicable regu-

lations of your country with respect to the operation of

the machine. Put the operating instructions in a clear

plastic folder to protect them from dirt and humidity, and

store them near the machine. The instructions must be

read and carefully observed by each operator prior to

starting the work. Only persons who have been trained

in the use of the machine and have been informed on

the related dangers and risks are allowed to use the

machine. The required minimum age must be met. In

addition to the safety notes contained in the present

operating instructions and the special regulations of

your country, the generally recognized technical rules

for the operation of machines must be observed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DP16SL in the language / languages: English, German, French, Italian, Polish, Swedish, Norwegian as an attachment in your email.

The manual is 6.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DP16SL Manual

Product: