Manual Scheppach Air Force 4 (page 27 of 72) (English, German, Danish, French, Swedish)

781497

Zoom out

Zoom in

1/72

GB | 27

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

Using the tyre ination device

(g. 1, 6, 7, 8)

The compressed air tyre ination device (G)

is used to inate car tyres. With the corre-

sponding accessories it can also be used to

inate and regulate bicycle tyres, inatable

dinghies, air mattresses, balls etc.

Pressure can be released by actuating the

vent valve (7).

m Attention! The manometer has not

been o󰀩cially calibrated! After inating,

please check the air pressure with a cal-

ibrated device.

Using an air blow gun

You can also use the tyre ination device

(G) as an air blow gun to clean out cavi-

ties and to clean soiled surfaces and work

equipment.

To do so, please rst remove the hose with

the valve adapter (8).

Now screw the blow-out adapter (D) to the

tyre ination device (G).

Using the adapter set

The adapter set enables you to use the

following additional capabilities of the tyre

ination device:

• Pumping up balls with the help of the ball

needle (F).

• The valve adapter (E) enables bicycle

tyres to be inated.

• Filling pools, air mattresses or boats with

the help of the additional adapter (K).

• Filling items with threaded valves (e.g.

Boats) with the screw-in valve adapter (J).

• Deating large volume items. The deat-

ing adapter (C) can be used for this.

9. Attachment and operation

n Important!

You must fully assemble the appliance

before using it for the rst time!

Mains connection

• The compressor can be connected to

any 220 - 240-240 V~ 50 Hz shock-proof

socket which is protected by a 16 A fuse.

• Before you use the machine, make sure

that the mains voltage is the same as the

operating voltage (see the rating plate).

• Long supply cables, extensions, cable

reels etc. cause a drop in voltage and

can impede motor start-up.

• At low temperatures below +5°C, slug-

gishness may make starting di󰀩cult or

impossible.

ON/OFF switch (g. 1)

• To switch on the compressor, press the

button (2) on position I.

• To switch o󰀨 the compressor, press the

button (2) on position 0.

Establishing connections (g. 2-4)

m Attention! Switch the device o󰀨 for this.

When doing so, hold the coupling rmly

in order to avoid injuries due to the hose

springing back.

• First connect the air hose (5) with the

quick coupling of your compressor.

• Connect the tting of your compressed

air tool to the compressed air hose (5) of

the compressor.

• To disconnect this coupling again, pull

the quick-coupling (4) back at the com-

pressed air hose (5).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Air Force 4 in the language / languages: English, German, Danish, French, Swedish as an attachment in your email.

The manual is 2.53 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Air Force 4 Manual

Product: