Manual Schaudt Elektroblock EBL 101 C (page 3 of 16) (English)

629660

Zoom out

Zoom in

1/16

Instruction Manual Electrobloc EBL 101 C

Date: 30.09.2008

811.553 BA / EN

2 Introduction

This instruction manual contains important information on the safe operation

of equipment supplied by Schaudt. Ensure you read and follow the safety in-

structions provided.

The instruction manual should be kept in the vehicle at all times. Ensure that

other users are made aware of the safety regulations.

Y This device is not intended to be used by persons (including children)

with limited physical, sensory or mental aptitude or lack of experience

and/or knowledge unless they are supervised by a person responsible for

their safety or have received instruction from this person as to how the

device is used.

Children are to be supervised so as to ensure they do not play with the

device.

This device is intended for installation into a vehicle.

3 Operation

The Electrobloc is operated solely from the DT ... control and switch panel

connected (apart from battery isolation).

The EBL Electrobloc 101 C does not require daily operation.

Initial settings are only required after the type of battery (lead-acid or lead-

gel) has been changed or during commissioning or when upgrading with ac-

cessories (see section 3.2 and EBL 101 C installation instructions for de-

tails).

3.1 Switching system on/off

Y ATTENTION!

Incorrect Electrobloc settings.

Damage to connected devices. Therefore prior to starting:

F Ensure the leisure battery is connected.

F Ensure that the battery selector switch (Fig. 1, Pos. 1) is set to the

correct position for the inserted battery.

F Ensure that the AES fuse (Fig. 4, Pos. 16) is only inserted if an AES

refrigerator is connected to the system. Otherwise, the leisure battery

may totally discharge. Damage to the battery is possible.

Disable battery isolation on Electrobloc:

³ Move slide switch (see Fig. 4, Pos. 15) into position ”Battery ON”

³ After disabling the battery cut-off switch or after changing batteries: 12 V

main switch on the DT ... control and switch panel must be turned on

briefly to start up the consumers.

12 V main switch

(on DT ... control and

switch panel)

Jag äger en Detleffs husbil med elekronikskåp EBL101. Jag använder ett AGM-batteri till bodelen. Hur skall batteri-väljaren ställas på elektronikskåpet? Bly eller Gel?
Tack! Submitted on 20-10-2021 at 10:11
Reply Report abuse
Hi
Got a electroblock 101 on a Hymer and it doesn't seem to be charging
Also the AES does not work on 12 v could you tell me if there is
A problem with the electroblock
Regards Submitted on 11-9-2021 at 21:26
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Schaudt Elektroblock EBL 101 C in the language / languages: English as an attachment in your email.

The manual is 0,62 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Schaudt Elektroblock EBL 101 C

Schaudt Elektroblock EBL 101 C User Manual - German - 16 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Schaudt Elektroblock EBL 101 C Manual

Product: