652760
18
Zoom out
Zoom in
Previous page
1/20
Next page
18 - EN
“ON” indicating that the function is active.
To turn this function off, press and hold the DISPLAY AUTO CHANGE ON/OFF (7) once
again for 2 seconds in the clock display mode until the display shows “OFF”.
Mood Light
This unit is equipped with an LED mood light. You can switch it on and off by using the LIGHT
ON/OFF switch (16) at the back of the unit.
Radio
Listening to the Radio
Press the ON/OFF button (9) to switch on the radio.
Select a desired radio station by pressing the buttons ◄ / TUNE - (7) or ► / TUNE +
(8) repeatedly.
To automatically search for the next available radio station, press and hold for 2 seconds
the buttons ◄ / TUNE - (7) or ► / TUNE + (8).
To increase or decrease the volume, press the VOLUME + (6) or VOLUME - (4) button.
To switch the radio off, press the ON/OFF button (9).
Note: For the best FM reception completely unroll the FM wire antenna.
Radio Station Presets
1. Press the ON/OFF button (9) to switch on the radio.
2. Select a desired radio station using the buttons ◄ / TUNE - (7) or ► / TUNE + (8).
3. Press and hold the MEM button (3) for 2 seconds. “P01” will ash in the display.
4. Select a preset between 01 and 10 on which you would like to store the current station
using the buttons ◄ / TUNE - (7) or ► / TUNE + (8).
5. Press the MEM button (3) again to store the station on the selected preset.
6. Repeat steps 2 to 5 to store a total of up to 10 radio stations.
7. To recall one of the stored stations press the M+ button (3) or M- button (2) repeatedly
during radio mode to select the desired preset.
Sleep Function
The sleep function enables you to set a countdown timer after which the radio will turn itself off
automatically.
While listening to the radio, repeatedly press the SNOOZE button (5) to select a desired
countdown after which the radio will turn itself off automatically.
You can select 90, 60, 30, or 15 minutes.
To check the remaining time on the countdown, press the SNOOZE button (5) once.
If you want to cancel the function, press the SNOOZE button (5) repeatedly until “OFF”
appears in the display.
Technical Specications
Power supply: AC 230V ~ 50Hz
Battery backup: 3V (CR2032 at lithium battery, not included)
Frequency range: FM 87.5 - 108 MHz
Technical specications and design may change without notice.
18


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaub Lorenz RW210 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaub Lorenz RW210 in the language / languages: English, German as an attachment in your email.

The manual is 0,59 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info