690871
28
Zoom out
Zoom in
Previous page
1/30
Next page
- 28 -
User Manual | 09.2018 | v01
www.schaererusa.com Warranty Information
Vendor. The service technician will make an on-site assessment of whether or not a repair is covered under warranty.
If the customer has questions about warranty coverage or disputes the technician’s decision that a service call is
not covered under manufacturer’s warranty, please contact Schaerer USA at 888-989-3004 to discuss warranty
coverage.
Preventative Maintenance Calls
Two preventative maintenance visits shall be included. These visits shall be scheduled in or near the 2nd and 4th
quarter and need to take place during normal business hours. Schaerer USA will coordinate scheduling through
its Service Vendors. In the event that the store or site does not make itself available for a PM visit, Schaerer USA
reserves the right to void its obligation toward this visit and the warranty in general.
Schaerer USA Corporation is entitled to utilize customer-initiated service visits to perform the preventative
maintenance inspection, should one occur during or near the respective PM dates.
Components/Parts Covered Under Warranty
The following major internal components are covered under this contract:
Control Board PC-Board
Pump Head Pump Motor
Flow Meter Brewing Unit (Automat)
Brew Valve Tea Valve
Steam Valve Temperature Probe (internal damage)
Water Boiler Steam Boiler
Grinders Grinder Motors
Brew Group Drive Motor Position switches (internal damage)
Transformer Card Reader
Display (internal damage) Air Pump
Warranty Exceptions
Examples of components NOT covered under this contract, excluding manufacturer defects:
Paneling (Shell) Bean Hopper
Cup Warmer Plate Drip Tray
O-rings Product Buttons (external damage)
Temperature Probe (external damage) Espresso Spout
Steam Wand Hot Water Spout
Grinder Blades (normal wear and tear) Display (external)
Chip Cards
Examples of major component malfunctions NOT covered under manufacturer’s warranty:
Any valve that is clogged or damaged by calcium or other solids/deposits.
Any sensor is covered with calcium or other solids/deposits.
Any boiler lled with solids/deposits that needs to be replaced.
Any damage due to cartridge residue reaching the machine because it was not ushed properly.
Examples of operator error, misuse, abuse, neglect, lack of cleaning, etc., issues that are NOT covered under
manufacturer’s warranty:
• Clogged brew group/automat due to lack of cleaning.
Any clogging of the drip tray or cracks in the drip tray.
• Foreign objects (coins, small stones, plastic objects, etc.) in the grinders.
• Position switches, inside the automat/brew group area, bent by the operator.
Calibration complaints (beverage volume and temperature) based on measurements not following the
correct measuring procedure.
• Main waterline being turned off.
The examples listed above do not represent an exhaustive list of the errors that might be encountered. They are
examples only. Terms and conditions of this contract are subject to change.
28


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Schaerer Coffee Art Plus 20BTN at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Schaerer Coffee Art Plus 20BTN in the language / languages: English as an attachment in your email.

The manual is 9,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info