638438
5
Zoom out
Zoom in
Previous page
1/17
Next page
4
SET UP & CONNECTION
Mains Connection
1. Connect the AC power cord to the unit via the AC socket at the back.
2. Plug the AC power cord to the AC mains outlet.
Network Connection
Wired network
1. Check rst of all whether the control lamps (LINK/ACT) of your LAN connection or your router light up.
2. Use an Ethernet cable with RJ45 connector to connect the NETWORK socket of the radio with the LAN port of your
router.
3. Proceed for the operation as described in the below “GETTING STARTED”. But no need to run through the setup
wizard.
Note: Information on the LAN connection can be obtained from the user manual of the router manufacturer.
Wireless network
1. Check rst of all whether the control lamps (LINK/ACT) of your WLAN connection or your router light up.
2. Proceed for the operation as described in the below “GETTING STARTED”. It is highly recommended to run through
the setup wizard in the system settings section.
Note: Information on the WLAN/WiFi network connection can be obtained from the user manual of the router manufacturer.
Walls or other obstacles may inuence the WiFi range. Try to nd the best location to avoid interruption and
interference while operating.
GETTING STARTED
Press the “
” button once to switch on the radio, the display will show the main menu. To go to a function or open a sub-
menu, rotate the SCROLL control followed by pressing on it to conrm. Each function is selected via a menu consisting of
several levels.
Main menu
The following modes can be selected in the main menu:
Internet radio, Music player, FM radio, AUX in, Sleep, Alarms, System settings.
To select your desired function, rotate the SCROLL control followed by pressing on it to conrm.
System settings
Set up wizard
The setup wizard is available in the system settings section, you can run through this to congure settings for date/time
and network, once this has nished, your radio is ready to use.
Note: No need to run through the setup wizard if a wired network is used.
2/24 hour display
To select your preference between 12 and 24 hour clock display format - rotate the SCROLL control followed by pressing
on it to conrm.
Time/Date
The time and date can be manually set or automatically via the network or FM.
Auto update
The auto update works with data sent over FM or the Internet. The clock is only updated when in a corresponding mode,
so it is recommended to select a mode that you use regularly.
1. Select auto update from FM or Network.
2. Select the appropriate time zone if the auto update is done by the Internet.
3. If your country uses daylight saving, the automatically update time may be wrong by one hour. Set the daylight savings
to ON when daylight savings are in effect.
Manual set
1. If “No update” is selected, the wizard will prompt you to set the time and date
manually. The date and time are displayed in dd-mm-yyyy and hh:mm AM/PM
format.
2. The value to be set will ash, rotate the SCROLL control to adjust the value
followed by pressing on it to go for the next setting, rst set the date then nally
the time.
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scansonic IN300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scansonic IN300 in the language / languages: English as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scansonic IN300

Scansonic IN300 User Manual - German - 17 pages

Scansonic IN300 User Manual - Dutch - 17 pages

Scansonic IN300 User Manual - French - 17 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info