Zoom out
Zoom in
Previous page
1/26
Next page
I n s t r u c t i o n M a n u a l
F M / I n t e r n e t R a d i o
1


Need help? Post your question in this forum.

Forumrules


Content of pages


  • Page 1

    I

    n

    s

    t

    r

    u

    c

    t

    i

    o

    n

    M

    a

    n

    FM/Internet

    u

    a

    l

    Radio



  • Page 2

    Safety Information
    9. Do not defeat the safety purpose of the polarized
    or grounding - type plug. a polarized plug has two
    blades with one wider than the other. A grounding
    type plug has two blades and a third grounding
    prong. The wide blade or the third prong are
    provided for your safety. If the provided plug does
    not fit into your outlet, consult an electrician for
    replacement of the obsolete outlet.

    The lightning flash with arrowhead symbol
    within an equilateral triangle is intended to
    alert the user to the presence of uninsulated
    "dangerous voltage" within the product's
    enclosure that may be of sufficient
    magnitude to constitute a risk of electric
    shock to persons.
    The exclamation point within an equilateral
    triangle is intended to alert the user to the
    presence of important operating and
    maintenance (servicing) instructions in the
    literature accompanying the appliance.

    10. Protect the power cord from being walked on or
    pinched particularly at plugs, convenience
    receptacles, and the point where they exit from
    the apparatus. If the power cord is damaged, it
    must be repaired by a qualified repairer.
    11. Only use attachments/accessories specified by
    the manufacturer.
    12. Use only with the cart, stand, tripod, bracket or
    table specified by the manufacturer, or sold with
    the apparatus. When a cart is used, use caution
    when moving the cart/apparatus combination to
    avoid injury from tip-over.

    WARNING: TO REDUCE THE RISK OF FIRE OR
    ELECTRIC SHOCK, DO NOT EXPOSE THIS
    APPLIANCE TO RAIN OR MOISTURE.
    IMPORTANT SAFETY INSTRUCTIONS
    To reduce the risk of electrical shock, fire, etc.:
    1. Read these instructions.
    2. Keep these Instructions.
    3. Heed all Warnings.
    4. Follow all instructions.
    5. Do not use this apparatus near water.
    6. Clean only with dry cloth. For stubborn stains,
    use a soft cloth dampened with a weak solution of
    mild detergent and water. Dry the apparatus
    immediately afterwards with a clean cloth. Do not
    use abrasive clothes, thinners, alcohol, or other
    chemical solvents, because they may damage the
    finish or remove the panel lettering.
    7.Do not block any ventilation openings. The
    ventilation shall not be impeded by covering the
    ventilation openings with items, such as
    newspapers, table clothes, curtains, etc.
    8.Do not install near any heat source such as
    radiators, heat registers, stoves, or other
    apparatus (including amplifiers) that produce heat.

    13. Unplug this apparatus during lightning storms or
    when unused for long periods of time.
    14. Refer all servicing to qualified service personnel.
    Servicing is required when the apparatus has
    been damaged in any way, such as power-supply
    cord or plug is damaged, liquid has been spilled
    or objects have fallen into the apparatus, the
    apparatus has been exposed to rain or moisture,
    does not operate normally, or has been dropped.
    15. The apparatus shall not be exposed to dripping or
    splashing and no objects filled with liquids, such
    as vases, shall be placed on the apparatus.
    16. The mains plug or an appliance coupler is used
    as the disconnect device, the disconnect device
    shall remain readily operable.
    17. Please read Rating Labels at the back of the
    Sender and Receiver for power input and other
    safety information.



  • Page 3

    Contents
    Safety Information

    2

    Package Content

    2

    Internet Radio Quick start Guide

    3

    What you need before you can use your Internet Radio ......................................................3
    Unit Front Overview ............................................................................................................4
    Unit Back Overview ............................................................................................................5
    Setup Wizard .......................................................................................................................5
    Select a Station through Podcasts ........................................................................................8
    Get Access Code and FAQ Solutions ..................................................................................8
    Add Station to ‘My Favourites’ ...........................................................................................9
    Add Station to ‘My Added Stations’ ................................................................................. 10
    Changing the Station Information ...................................................................................... 11
    Station Updates .................................................................................................................. 11
    Music Player Mode ............................................................................................................ 13
    FM Mode ........................................................................................................................... 15
    Setting Station Presets ....................................................................................................... 16
    Selecting a Preset Station ................................................................................................... 16
    AUX IN Mode ................................................................................................................... 16

    General Operation

    17

    Return to Main Menu......................................................................................................... 17
    Adjust Volume Level ......................................................................................................... 17
    Browse Station Information ............................................................................................... 17
    Sleep Function ................................................................................................................... 17
    Setting Clock ..................................................................................................................... 17
    Setting Alarm ..................................................................................................................... 18

    System settings

    19

    Equaliser ............................................................................................................................ 19
    Network setup .................................................................................................................... 19
    Download Scansonic Via App Store: ................................................................................ 20
    Play Your Radio Via Apps: ............................................................................................... 20
    Language ........................................................................................................................... 21
    Factory Reset ..................................................................................................................... 21
    Software Update ................................................................................................................ 21
    Enter Setup Wizard ............................................................................................................ 22
    SW Version and Radio ID ................................................................................................. 22
    Brightness .......................................................................................................................... 22

    Troubleshooting

    23

    Specification

    24



  • Page 4

    Package Content

    Main Unit

    Adapter

    Instruction
    Manual

    2



  • Page 5

    Internet Radio Quick start Guide
    What you need before you can use your Internet Radio
    Thanks for your buying! Before use it, you need to know followings:

    LAN Setting:
    Make sure the internet environment is ready and the network settings is available for LAN (ADSL or Cable
    Modems is highly recommended).

    Wireless LAN Setting:
    • A broadband Internet connection.


    A wireless access point (Wi-Fi) connected to your broadband Internet, preferably via a router.



    If your wireless network is configured to use Wired Equivalent Privacy (WEP) or Wi-Fi Protected
    Access (WPA) data encryption then you need to know the WEP or WPA code so you can get the
    Internet Radio to communicate with the network.



    If your wireless network is configured for trusted stations you will need to enter the Radio’s MAC
    address into your wireless access point. To find the Radio’s MAC address use menu items as
    follows:
    Press the MENU button

    System settings

    Network

    View settings

    MAC address

    To enter the MAC address into your wireless access point, you must read the instructions
    supplied with the wireless access point.

    Before you continue, make sure that your wireless access point is powered up and connected to your
    broadband Internet, or your LAN cable is setting well. To get this part of the system working, read the
    instructions supplied with the wireless access point and LAN connecting is highly recommending!

    3



  • Page 6

    Unit Front Overview

    Control
    STANDBY/ON

    Internet radio

    FM

    Music Player

    AUX IN mode

    Press to turn on/off unit
    (When alarm is coming, press to turn alarm off.)

    MODE
    Press to switch among Internet Radio, Music Player, FM Mode and Auxiliary Input.
    MENU
    Press to Main menu and other options
    INFO
    Press to display Queue information
    Music player mode: Press to previous Track
    SCAN
    PRESETS

    FM mode: While frequency is showing up, press to scan active stations
    Music player mode: Press to Play or Pause
    Internet, FM mode: Press to access to ‘Preset Menu’
    Music player mode: Press to Next Track

    VOLPress to decrease volume level
    VOL+
    Press to increase volume level
    BACK
    Go back to previous page

    a.

    Turn the knob to change options, press to select

    b.

    FM mode: While frequency is showing up,
    press to search next available station

    c.

    When alarm is coming, press to postpone alarm

    Note: In the following, we name this knob as “SELECT”.

    4



  • Page 7

    Unit Back Overview

    Setup Wizard
    Step 1 - Power up
    1. Connect to your Internet Radio adapter and ensure the power LED is lighting up, extend antenna.
    2. In use, it can be switched on or off by pressing STANDBY/ON. For initial use, it will ask you to
    ‘Setup wizard’.

    Step 2 – Setup wizard
    1. Continue the above step, press SELECT (the SELECT knob) to confirm ‘YES’, and then turn
    SELECT to your preferred ‘hour format’, press SELECT to confirm.

    5



  • Page 8

    2.

    Press SELECT to confirm ‘Update from Network’. Now, follow your radio’s instruction, configure the
    following parameters:
    Timezone: select your local timezone.
    Daylight saving: On or Off as per your country status.
    Wlan region: Most of Europe/USA/Canada/Spain etc.
    SSID: In some cases, radio may find more than one network. Turn SELECT to your favorite one, press
    SELECT to confirm.
    Note: If a password (WEP/WPA) isn’t required by your network, radio will connect to the network
    automatically.

    3. If a WEP/WPA key (password) is required, radio will ask you to input the WEP/WPA code and display
    the password entry screen as follows:

    Turn SELECT to cycle through the alphanumeric character list, press SELECT to select an
    appointed character.

    Note: WEP/WPA pass codes are case-sensitive.

    If a wrong operation is being conducted, select ‘
    character.
    Note: a.>

    = Backspace.

    b.> the method of select

    ,

    SELECT , and you can select
    or
    c.>

    ’ to delete designated

    or

    : while cursor point to ‘

    ’, anti-clockwise turn

    , then continue anti-clockwise turn SELECT to select

    in turn.

    means return to previous track.

    d.> Radio will automatically save the WEP/WPA you’ve input, so no bother to re-enter these codes.

    ·

    After selecting the final character of your password, turn SELECT to

    , and then press

    SELECT to confirm, and then follow your radio’s demonstration, press SELECT again to exit.

    6



  • Page 9

    Access Wireless Network
    1. Continue above step as previous page, press SELECT to enter ‘Internet radio’ mode. Or press MENU
    or BACK to Main menu page.
    2. While cursor point to < Station list >, press SELECT to confirm.

    3. Then refer following section to choose stations. If fail to connect to network, please follow:

    a. Check your Router, see it working normally or not;
    b. Relocating your radio to a stronger signal position is necessary!
    c. Make sure your password is input correctly.

    Local Stations
    Make sure your radio connected to network.
    ‘Local China’ is, can be changeable according to your current location. For instance, it can be local US, or
    local UK, etc. In a word, it’s a very easy way for you to find your local programs.

    1. To enter Local stations, press MENU

    < Station list >

    < Local China >, press SELECT to confirm.

    2. Turn SELECT to your favourite item, press SELECT to confirm, and then step by step to the program
    you desired.

    Choose a Station
    Note: ensure your radio has already connected to network, if you encountering any step is not consistent
    with this instruction menu, press BACK to move back.

    1. To access to this order, press MENU

    < Station list >

    7

    < Stations >, press SELECT to confirm.



  • Page 10

    2. There are five options available for you to choose a station as above photo.
    ‘LOCATION’ enables you to choose from the radio stations provided by any country which you choose from a list.

    a. While cursor point to < Location >, press SELECT to confirm.
    b. Turn SELECT to the region you wanted, press SELECT to confirm.
    c. Using the same method to choose country, station in turn, radio will perform loading.

    ‘GENRE’ enables you to choose radio stations according to their content such as Classic Rock, Sport, News, etc.

    Note: a. Some radio stations do not broadcast 24 hours per day, and some stations are not always on-line.
    b. If this station has on-demand content, that is, it gives an option of listening the old programs which
    have already been broadcast.

    Select a Station through Podcasts
    1. To access to this order, press MENU
    < Station list >
    and then turn SELECT to your favorite option.

    2.

    < Podcasts >, press SELECT to confirm,

    Press SELECT to confirm, and then step by step to your selecting program.

    Get Access Code and FAQ Solutions
    1. To access to this order, press MENU

    < Station list >

    < Help >, press SELECT to confirm.

    Note: at this step, you can also listening radio FAQ solutions.

    2. While cursor point to < Get access code >, press SELECT to confirm, you will get it.

    8



  • Page 11

    Add Station to ‘My Favourites’
    ☺ 1. Visit website: http://www.wifiradio-frontier.com
    ☺ 2. Click on the register link.

    ☺ 3. Create account login, enter Access code is required, for how to get this code, please refer
    to previous page.
    Note: want to member login? Therefore save your registered ‘Email address’ and ‘Password’.

    ☺ 4. You will able to take advatage of the various additional features and services offered by the
    Frontier internet Radio Portal.

    ☺ 5. After above setting is done, in order to have your radio access your new settings, getting
    your radio power off for several minutes is necessary.

    ☺ 6. How to play ‘My favourites’? Your need two steps:
    a. Press MENU

    < Station list >

    < My favourites >, press SELECT to confirm.

    b. Turn SELECT to your favorite option, and then press SELECT to load.

    Note: You added ‘my favourites’ stations will show up at ‘my favourites’ subdirectory. Doing a ‘factory reset’
    cannot erase them.

    9



  • Page 12

    Add Station to ‘My Added Stations’
    Even though the Internet radio portal contains thousands of stations, you may still want to listen to
    stations not listed. You can add your own stations via the portal.

    ☺ 1. Visit website: http://www.wifiradio-frontier.com
    ☺ 2. Login as a member (at previous page, you registered).

    ☺ 3. You will able to take advatage of the various additional features and services offered by the
    Frontier internet Radio Portal.

    ☺ 4. After above setting is done, in order to have your radio access your new settings, getting
    your radio power off for several minutes is necessary.

    ☺ 5. How to play ‘’? Your need two steps:
    a. Press MENU

    < Station list >

    < My added stations >, press SELECT to confirm.

    b. Turn SELECT to your favorite option, and then press SELECT to load.
    Note: Your added stations will show up at ‘my added stations’’ subdirectory. Doing a ‘factory reset’ cannot
    erase them.

    10



  • Page 13

    Changing the Station Information
    It is possible to view the information that is displaying on the second line of the display when listening
    Internet program. To view more information, you can press INFO repeatedly.



    Station Description
    This is scrolling text information supplied by the Internet
    station. It may comprise information on music titles or details
    of the programme which is provided by the broadcaster.



    Station Location
    This is a description of the type of programme provided by
    either internet radio station or broadcaster.



    Reliability
    This will show the degree of reliability of station which you are
    listening to.



    Signal Info
    This shows the digital bit rate and the signal mode.



    Playback Buffer
    This displays the playback buffer strength of current station.



    Date Info
    This displays the date which is provided by the broadcaster so
    will be accurate.

    Station Updates
    Occasionally, radio will tell you that it is receiving an updated station list. It does this automatically and
    periodically, ensuring your radio always has the latest station directory on-board.

    11



  • Page 14

    Shift to wired network

    Step 1 – Choose LAN Setting
    Note:

    a. Ensure LAN cable connecting to LAN socket already.

    1. To access to this order, press MENU
    confirm.

    < System settings >

    < Network >, press SELECT to

    2. Turn SELECT to < Manual settings >, press SELECT to confirm.
    3. While cursor point to < Wired >, press SELECT to confirm.
    4.

    While cursor point to < DHCP enable >, press SELECT to confirm. After a while, the Ethernet
    connection would be done.

    ☺ If the connection is failed, please follow:
    a. Check your Router, see it working normally or not.
    b. Check your LAN cable, make sure it hasn’t damaged,
    c. See the port of cable which inserting LAN socket is fine.

    Shift to Wireless Network
    1. Refer step1-3 of above ‘choose LAN setting’, and then turn SELECT to < Wireless >, press
    SELECT to confirm.
    2. While cursor point to < DHCP enable >, press SELECT to confirm, and then step by step to enter
    wireless network.

    ☺ Now, setting to wireless is OK!

    12



  • Page 15

    Music Player Mode


    Setting up a Music Server
    In order for your radio play music files from a computer, the computer must be set up to share files or
    media.
    UPnP media sharing allows devices like this radio to play music from a shared media library,
    navigating through tag menus such as Artist, Album or Genre.
    If you are running a suitable server system such as a PC with Windows Media Player10 or later
    (WMP), and your music library is well-tagged, then it is recommended to use media sharing.
    Only the UPnP server needs to be set up.



    Sharing Media with Windows Media Player

    The most common UPnP server is Windows Media Player (10 or later). Alternatively, other UPnP
    platforms and servers may be used. To set up WMP for media sharing, perform the following steps:
    1. Ensure that the PC is connected to the network.
    2. Ensure that the radio is powered on and connected to the same network.
    3. In WMP, add to the media library the audio files and folders you want to share with your radio
    (Library > Add to Library…).
    4. In WMP, enable media sharing (Library > Media sharing…).

    5. Make sure that the radio has accessed to the shared media by selecting it and clicking Allow. You can
    also set a name for the shared media in Settings… Click OK to close the dialogue boxes.
    6. The PC is now ready to stream the music to the radio. The WMP UPnP service runs in the
    background; there is no need to start WMP explicitly.

    13



  • Page 16



    Play Shared Media

    1. Press MODE repeatedly until < Music player > is showing up.

    Note: Or, enter < Main menu >, and then turn SELECT to < Music player >, press SELECT to confirm.

    2. While cursor point to < Shared media >, press SELECT to confirm, and then step by step to your
    selecting Music. Press

    or

    to shift tracks, Press

    to play or pause.

    3. Adjust the volume by pressing VOL- or VOL+.



    Repeat Play Mode

    1.

    Press MENU, and then turn SELECT to < Repeat play: Off >, press SELECT to shift ‘Off’ to ‘On’, or
    press SELECT again shift from ‘On’ to ‘Off’.



    Shuffle Play Mode

    1.

    Press MENU, and then turn SELECT to < Shuffle play: Off >, press SELECT to shift ‘Off’ to ‘On’.



    Now Playing Information

    1. While a track is playing, the screen shows its track, artist and album if provided. There is also a
    progressing bar with figures for elapsed time and total track time.

    2. To view further information, press INFO, screen will appear displaying information such as Artist,
    Album, bit rate, Playback buffer, Today’s Date, etc.

    14



  • Page 17

    FM Mode


    General operation

    1.

    Press MODE repeatedly until < FM Radio > is showing up.
    For initial use, it will start at the beginning of the FM frequency range (87.50MHz).
    Otherwise, the last listened FM station will be selected.

    Note: or enter < Main menu >, and then turn SELECT < FM >, press SELECT to confirm.

    3.

    4.

    To manually adjust frequency, while frequency shows up, turn SELECT to adjust it by 0.05MHz per
    step.

    To auto-searching, while frequency shows up, simply press SELECT or SCAN.
    Note: To ‘auto-searching’ more effectively, please refer to below ‘scan setting’.



    Scan Setting
    By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
    (hiss) from weak stations.
    To change the scan settings to stop only at stations with good signal strength, press MENU
    Scan setting >
    Strong stations only?
    Yes, press SELECT to confirm.



    <

    Audio Setting
    By default, all stereo stations are reproduced in stereo. For weak stations, this may result in a poor
    signal-to-noise ratio (hiss).

    To play weak stations in mono, press MENU

    < Audio setting >

    press SELECT to confirm.

    15

    Listen in mono only?

    Yes,



  • Page 18

    Setting Station Presets
    Your radio can store 10 Internet and 10 FM stations preset. To store the current station:
    1. Press PRESETS, and then turn SELECT to your expected option 1-10.
    2. Press and hold SELECT to confirm, your radio would indicate ‘Preset stored’, and then your radio
    will return to its normal working condition, and preset icon appeared on display.

    Selecting a Preset Station
    To select a stored Internet station:
    1. Press MODE to go into relative mode: Internet or FM mode.
    2. Press PRESETS, and then turn SELECT to your selecting one.
    3. Press SELECT to confirm.

    AUX IN Mode
    1. Press MODE repeatedly until < AUX in > is showing up.
    Note: Or enter ‘Main menu’, and then turn SELECT
    to < Auxiliary in >, press SELECT to confirm.

    2. Through a cable connection, your radio can be transformed into a high quality digital audio speaker
    system.
    3. Connect one end of the audio cable to the headphone (or auxiliary out) socket of your source
    device, the other end connect to AUX socket on the rear of your radio. The radio display will show:

    4. To gain optimal volume levels, adjust the output volume level on both the source device and on
    radio itself is recommended.
    Note: AUX IN allows for quick and easy connection the MP3 player or other external sound sources.

    16



  • Page 19

    General Operation
    Return to Main Menu



    Press MENU, and then turn SELECT to < Main menu >.
    Or, you can move back to radio’s top-line < Main menu >, at any time by pressing BACK repeatedly.

    Adjust Volume Level


    Adjust the volume level by pressing VOL+ or VOL-.



    Radio will remember its previous volume level.

    Browse Station Information




    It is possible to view the information that is displayed on the second line of the display when listening
    Internet or FM program, this can be achieved by pressing INFO repeatedly.
    Note: ‘AUX in mode’ has no this function.

    Sleep Function
    1. It can be activated by pressing MENU

    < Main menu >

    < Sleep >, press SELECT to confirm.

    2. Turn SELECT to define the sleep period: off/15/30/45/60 minutes.
    3. When your selecting period is appeared, press SELECT to confirm.
    Note: a. At this stage, sleep icon shows up, as well as shows
    how long it will be expired.
    b. Radio will automatically put itself into standby mode after
    sleep time has elapsed.

    5. To continue enjoying your program, press STANDBY/ON.

    Setting Clock
    1. It can be activated by pressing MENU
    < System settings >
    < Time/Date >, press SELECT to
    confirm. Here, turn SELECT to cycle through a range of time settings:
    <Set Time/date>: Manually set-up both Time and Date
    <Auto update>: ‘‘Update from Network’ and ‘No update’
    <Set format>: ‘Set 24 hour’ and ‘Set 12 hour’
    <Set timezone>: turn SELECT to your local timezone, press
    SELECT to confirm
    <Daylight savings>: turn SELECT to ‘ON’, and then press
    SELECT to confirm, it is done!

    17



  • Page 20

    Setting Alarm
    Note: Setting Alarm, make sure setting time at first.

    1. It can be activated by pressing MENU

    < Main menu >

    < Alarms >, press SELECT to confirm.

    2. Turn to your expected one, press SELECT to confirm.

    3. Configure the following parameters:
    Ψ

    Enable: Off, Daily, Once, Weekends or Weekdays

    Ψ

    Time: 00:00

    Ψ

    Mode: Buzzer, Internet radio or FM

    Ψ

    Preset: this option depends on which alarm source you have setting, this option won’t be
    available unless you choose Internet radio or FM as alarm sound source

    Ψ

    Volume: turn SELECT to your preferred volume level, press SELECT to confirm


    Ψ

    Note: remember don’t set your radio volume level to zero (Mute), otherwise, when alarm is coming,
    the alarm sound cannot be heard.

    Save: finally, turn SELECT to this option, and press SELECT to confirm to make sure alarm
    saved

    The screen shows active alarms with an icon at the bottom left.
    To check alarms status, press STANDBY/ON to enter standby mode.



    Turn Alarm off ----------- When alarm is coming, you can either press STANDBY/ON to turn it off, or



    Play Snooze Function ----------- Press SELECT to postpone it, repeatedly press SELECT, the
    SNOONZE can be 5/10/15/30 minutes in turn.
    Note: a. While in SNOOZE function, the relative alarm should
    be twinkling, and shows how long it will be elapsed,
    during this time, you also can press STANDBY/ON to
    put the alarm off, press STANDBY/ON again to back
    to play mode.



    To cancel Alarm

    Refer to above step1-3, set ‘Alarm Enable status’ to ‘Off’, and then turn SELECT to ‘Save’, press
    SELECT to confirm, your radio would save your settings and show ‘Alarm saved’.

    18



  • Page 21

    System settings
    Equaliser
    Note: Several preset EQ modes are available; also a user-defined setting through ‘My EQ profile setup’.

    1. It can be activated by pressing MENU

    < System settings >

    < Equaliser >, press SELECT to

    confirm.
    2. Turn SELECT to your preferred one, take set ‘My EQ profile setup’ as example,
    a. Press SELECT to confirm ‘My EQ profile setup’.
    b. Press SELECT to confirm Bass, turn SELECT to adjust, and then press SELECT to confirm.
    c. Setting Treble, Loudness accordingly.
    d. Finally turn SELECT to ‘Save’, press SELECT to confirm your Equaliser settings.

    Network setup
    Note: Users experienced with networking issue may find these options useful for diagnosing and fixing network
    problems.

    1. There are some options for viewing and manually altering network settings by pressing MENU
    System settings >

    <

    < Network >, press SELECT to confirm.

    2. Turn SELECT to your purpose network setting option:
    Want access to another Router? --------- Internet wizard
    Want get MAC address, Wlan region, IP address etc? ---------- View settings.
    Want set it to another region? ---------- Wlan region
    Want to shift your radio connecting between wired network (LAN) and wireless? ----------- Manual settings
    Want see the list of registered networks or delete some of unwanted networks? ---------- Network profile

    3. Press SELECT to confirm to enter setting.

    19



  • Page 22

    Download Scansonic Via App Store:
    Note: the first generation of iPod Touch/iPhone is not compatible with App.

    Using the Wireless Device Remote Control
    application, you can control Scansonic radio
    from iPod Touch/iPhone/iPad.

    1. In your iPod Touch/ iPhone/iPad’s main menu,
    open the App Store by clicking the App store
    icon, as the photo at right side:

    2. In the App store, search for ‘Scansonic’.

    3. Touch ‘Scansonic’

    icon, and then hit the "free" button, it will then change the "free" to

    "install". Click again to install. You will be invited to enter your user name and password. You shall
    only have to enter your username once and then your iPod Touch/iPhone/iPad will remember it, but
    you will need to always enter a password to prevent just anyone from downloading apps to your
    equipment.
    4. Once your iPod Touch/iPhone/iPad has started downloading the app, a status bar will show up to
    indicate how long it will take to download. Once it completes, you can access your Scansonic radio

    anytime via a simply touch

    .

    Play Your Radio Via Apps:
    Note: Please set your iPod Touch/iPhone/iPad to use the same network access point as the Scansonic
    radio.

    1. For initial use, touch your radio icon

    , your device pop-up a dialog box invites you input ‘Net

    Remote Pin code’, the default code is 1234, you can give a user-defined code via you radio: press
    MENU

    < Main menu >

    < System settings >

    < Network >

    < Netremote PIN setup >.

    2. Want to keep your App works while your radio under standby mode? It needs set to ‘yes’ for Keep
    network connected. The path is:
    Press MENU
    connected >

    < Main menu >
    < System settings >
    Yes, press SELECT to confirm.

    20

    < Network >

    < Keep network



  • Page 23

    Language
    1. It can be activated by pressing MENU
    confirm.

    < System settings >

    < Language>, press SELECT to

    2. Turn SELECT to your preferred one, and then press SELECT to confirm, it is done!

    Factory Reset
    A factory reset resets all user settings to default values, so time/date, network configuration and
    presets are lost.
    However, the radio’s current software version is maintained, as is registration with the Internet
    radio portal.
    Internet radio favourites therefore remain unless you re-register your radio with another account
    on the portal website.
    1.

    It can be achieved by pressing MENU
    or NO. Turn SELECT to ‘YES’.

    2.

    Press SELECT to confirm ‘YES’.

    < System settings >

    Factory Reset

    Proceed? YES

    Software Update
    From time to time, your radio may make software upgrades available with bug fixes and/or
    additional features.
    If your radio detects that newer software is available, it asks if you want to go ahead with an
    update. If you agree, the new software is then downloaded and installed.
    After a software upgrade, all user settings are maintained.
    C A U T I O N
    Before starting a software upgrade, ensure that your radio is plugged into a stable mains power
    connection. Disconnecting power during a software update may permanently damage the unit.
    ∗ It can be activated by pressing MENU
    < System settings >
    Software update
    press SELECT to confirm. Or if you want your radio ‘Auto-check’, please follow:

    Check now,

    1. It can be activated by pressing MENU
    setting, press SELECT to confirm.

    Auto-check

    2.

    < System settings >

    Turn SELECT to < YES >, press SELECT to confirm.

    21

    Software update



  • Page 24

    Enter Setup Wizard
    When this unit is started for the first time, it runs through a setup wizard to configure settings
    for date/time and network.
    Once this is finished, the system is ready to use in most modes.
    1. To run the setup wizard again, the path is: < System settings >

    Setup wizard

    Yes.

    2. Press SELECT to confirm ‘Yes’, then step by step to set it.

    SW Version and Radio ID
    Note: This information may be requested when dealing with technical support issues.

    1. It can be activated by pressing MENU

    < System settings >

    < Info >.

    2. Press SELECT to confirm.

    Brightness
    Note: Here, High brightness level can get you pretty easy to view the station information. Set to Low can let you
    feel comfortable while you do not want the light bothering you.

    ·

    For Power-on condition:

    The path is: press MENU

    < System settings >

    < Brightness >

    Power-On level

    Low/Medium/High (Set to high level is recommended).

    ·

    For Standby condition:

    The path is: press MENU

    < System settings >

    < Brightness >

    Low/Medium/High (Set to low level is recommended).

    22

    Standby level



  • Page 25

    Troubleshooting
    If you experience any trouble with your wireless Internet Radio, then you may find it useful to visit the help
    section on our webpage: http://www.wifiRadio-frontier.com
    If you have trouble connecting the Radio to your wireless network, these steps may help to resolve the
    problem:
    1. Confirm that a Wi-Fi connected PC can access the Internet (i.e. can browse the web) using the same
    network.
    2. Check that a DHCP server is available, or that you have configured a static IP address on the Radio.
    You can configure a static IP address on the Radio using the menu item ‘System settings
    Manual settings

    Network

    Wireless’, and then select ‘DHCP disable’.

    3. Check your access point does not restrict connections to particular MAC addresses. You can view the
    Radio’s MAC address using the menu item ‘System settings

    Network

    View settings

    MAC

    address’.
    4. If you have an encrypted network, check that you have entered the correct key or password into the
    Radio. Remember that text-format keys are case sensitive. If, when attempting to connect to an encrypted
    network, your Radio displays: ‘Wireless error’ followed by a 5-digit number, then please ensure that you
    enter the correct passphrase for the network. If the problem persists, then you may need to consult your
    network configuration.
    5. If your Radio can connect to the network successfully, but is unable to play particular stations, it may be
    due to one of the following causes:
    a. The station is not broadcasting at this time of the day (remember it may be located in a different time
    zone).
    b. The station has reached the maximum allowed number of simultaneous listeners.
    c. The station is not broadcasting anymore.
    d. The link on the Radio is out of date.
    e. The Internet connection between the server (often located in a different country) and you is slow.
    Try using a PC to play back the stream via the broadcaster’s web site.
    6. If you can play back the station with a PC, use the form at http://www.wifiRadio-frontier.com to notify us
    so that we can change the station data that is used by the Radio.

    23



  • Page 26

    Specification
    ITEMS

    SPECIFICATIONS

    Description:

    FM/Internet Radio

    Power Requirements:

    AC adapter Input: 100-240Vac, 50-60Hz
    (Please use our provided power adapter only)

    FM Frequency Range:

    87.5-108MHz

    Rated Output Power:

    5Wrms

    Speaker

    4 ohm

    Earphone Jack

    32 ohm

    Dimensions

    204 x 121 x 130 mm

    This symbol on the product or in the instructions means that your electrical and electronic equipment should be
    disposed at the end of its life separately from your household waste. There are separate collection systems for
    recycling in the EU.
    For more information, please contact the local authority or your retailer where you purchased the product.

    24






Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scansonic IN200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scansonic IN200 in the language / languages: English as an attachment in your email.

The manual is 1,08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scansonic IN200

Scansonic IN200 User Manual - German - 33 pages

Scansonic IN200 User Manual - French - 33 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info