638432

Scansonic DA300 Manual

6
Zoom out
Zoom in
Previous page
1/45
Next page
UK-5
4. Press the
button to turn the radio on again, it will then automatically enter into the DAB mode and perform
auto scan function. After the scan has finished, the radio will select and display the first alphanumerically found
station.
ALARM FUNCTION
This unit incorporates an identical Dual Alarm function. You can have two individual alarm wake-up time and
wake-up mode settings to wake you to an electronic buzzer tone or your favourite radio station (DAB/FM).
Setting the alarm time and wake-up mode
1. Press the ALARM button once to enter into the Alarm Menu, then rotate the SCROLL control followed by
pressing on the same control to select Alarm (1 or 2).
2. Again rotate the SCROLL control followed by pressing on the same control to select "Alarm Setting'. The
display will show "Alarm # Setting" and the hour digit of the alarm time will flash. (F10)
3. Rotate the SCROLL control followed by pressing on the same control to adjust and confirm your desired alarm
time - first set the hour and then the minute.
4. After the confirmation of the minute setting, the alarm time is set and you will enter into the wake-up mode
settings.
5. Rotate the SCROLL control followed by pressing on the same control to adjust and confirm the wake-up mode
settings - first set the DAB and FM Preset (1-10), then the Buzzer Tone (1 or 2), finally the alarm Volume level.
(F11)
6. After the selection of the alarm volume level, the wake-up mode settings are completed and the alarm function
is now ready for you to activate.
7. Repeat the above procedures to set the other Alarm (1 or 2).
Activating the alarm function
1. To activate the alarm function, press the ALARM button to enter into the Alarm Menu and select Alarm (1 or 2).
2. Rotate the SCROLL control followed by pressing on the same control to select "Alarm Source".
3. Again rotate the SCROLL control and the associated alarm wake-up mode will be displayed and changed in
the below sequence:
4. When the display shows your desired alarm wake-up mode, press the SCROLL control, the alarm function is
now activated and the associated alarm icon will be displayed.
5. When the alarm time arrives, the selected wake-up mode will be on and the alarm icon in the display will flash
to indicate the alarm is triggered. To stop the alarm sooner, press the
button.
Note 1: If you have activated the alarm function and the wake-up mode is DAB or FM, make sure that the alarm
volume level is set at a sufficient level for you to hear.
Note 2: The alarm comes first will have the priority and it would continue for a duration of one hour, the snooze
will just switch off this alarm temporary during this duration, so if the second alarm comes In this period, it will not
function. But if the first alarm is switched off before the second alarm arrives, then the second alarm will be
activated.
Automatic Alarm Repeat
The alarm will automatically repeat each day at the selected time as long as the alarm icon is displayed. To cancel
this function, go to the Alarm Menu and select "Alarm # off" in the associated "Alarm Source" menu.
Snooze function
When the alarm has triggered, press the SNOOZE button will temporary switch off the alarm for 5 minutes, the
display will show "Zz" to indicate snooze on. This is repeatable in the one hour alarm duration.
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scansonic DA300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scansonic DA300 in the language / languages: English, German, Danish, French, Italian as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info