638432

Scansonic DA300 Manual

3
Zoom out
Zoom in
Previous page
1/45
Next page
UK-2
Service/Maintenance
- To reduce the risk of electric shock, do not remove screws. The unit does not contain any user-serviceable
parts. Please leave all maintenance work to qualified personnel.
- Do not open any fixed covers as this may expose dangerous voltages.
- Ensure to unplug the unit from the mains socket before cleaning.
- Do not use any type of abrasive pad or abrasive cleaning solutions as these may damage the unit's surface.
FEATURES AND CONTROLS
1. VOLUME/SCROLL & OK/►/II
CONTROL
2. LCD DISPLAY
3. INFO/ BUTTON
4. MENU/ BUTTON
5. MODE BUTTON
6. SPEAKER
7.
BUTTON
8. ALARM/SNOOZE BUTTON
9. SLEEP BUTTON
10. MEMORY BUTTON
11. RODANTENNA
12. HEADPHONE JACK
13. AUXIN SOCKET
14. USB PORT
15. AC CORD SOCKET
SWITCHING YOUR RADIO ON FOR THE FIRST TIME
When the radio is connected to the AC power for the first time, it will be in standby mode. The display backlight
will be on for a few seconds, the display will first show the greetings and finally the clock. Press the
button
once to turn the radio on, it will then automatically enter into the DAB mode and perform auto scan function.
Clock setting
The clock will only set and be updated if you can receive DAB signals in your location. In order for the clock to
synchronise to the current local time you must leave it one DAB station for a short period. Manual clock setting is
not required.
LISTENING TO YOUR RADIO
Hints for better reception
This radio carries a single DAB/FM telescopic antenna, to obtain the best performance, you should fully extend
the antenna and adjust its position as well as the direction until you find the best reception. For ideal DAB
reception, always maintain the antenna in an upright vertical position is highly recommended.
DAB mode
If the radio is powered up and switched on for the first time, it will automatically enter into the DAB mode and
perform auto scan function. During the scan the display will show "Scanning ..." together with a slide bar that
indicates the progress of the scan and the amount of stations that have been found so far. (F1) (F2).
Once the scan has finished, the radio will select the first alphanumerically found station. To explore the found
stations, first press the SCROLL control once, then rotate the same control, and when you find a station that you
would like to listen to, press on the SCROLL control.
Note: If there is no stations found after auto scan, the radio will then enter into the Tune Select Menu, you can
now rotate the SCROLL control followed by pressing on the same control to select "Manual tune" or "Autoscan"
for stations.
3 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scansonic DA300 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scansonic DA300 in the language / languages: English, German, Danish, French, Italian as an attachment in your email.

The manual is 3,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info