GB
- 26 -
The pairing process
1. Before pairing, please check that both devices are fully
charged.
2. Check that both devices are within 3 meters of each
other.
3. Turn the Bluetooth receiver on and make sure it is in
pairing mode. (If in doubt, read your receiver user guide).
4. Turn the stereo transmitter on by pressing the On / Off
button. The red and blue LED flashes alternating for 6
seconds; the transmitter is in pairing mode.
5. Both devices should now find each other and pair. The
red and blue LED on the transmitter flashes slowly at
same time when the pairing is successful.
Turning the stereo transmitter
Normally, both devices only need turning on after the
pairing; everything else is done automatically.
Turning on: The transmitter is turned on by pressing on the
On / Off button. The blue LED lights up.
Turning off: Press the On / Off button for about 5 seconds;
the blue LED goes off.
Note: Read the user guide of your Bluetooth receiver to find
out how to turn it on / off.