711991
7
Zoom out
Zoom in
Previous page
1/8
Next page
Preparations for start-up
Charging the battery
1. The symbol " " on the LC display indicates
that the battery is depleted. Connect the product to a
USB port of a PC or a USB charger with the micro
USB cable.
2. The battery symbol in the LC display flashes or the
battery charge is indicated in per cent.
3. The battery symbol goes out when the battery is
full.
Setting the timer and the temperature display
1. Open the lock of the ON/OFF button (see figure on
page 8).
2. With the device switched off, press and hold the
MEMORY button until the flashing year is displayed.
Set the year with the ON/OFF button.
3. Press the MEMORY button again to enter the
setting of the month, day, hours and minutes.
4. Then "CL" is displayed. Press the ON/OFF button
"on" for constant display of the time or "off" to hide
the time. Up to 4 alarm times (AL1 - AL4) can be set.
When an alarm is set, the alarm time is displayed.
5. Press the MEMORY button once more to enter the
temperature display. Toggle between °C, °F, and no
temperature display (oFF) with the ON/OFF button.
Complete all settings by pressing the MEMORY
button. The alarm times are not activated by locking
the ON/OFF button.
- 10 -
Possible variations of the blood pressure during a
day:
How to obtain reliable measurement values?
For reliable measurement values, please follow our
recommendations:
1. Always make the measurement at the same time
and under the same conditions.
2. Do not eat, smoke or move during the
measurement. Do not drink coffee or consume
alcohol within 30 minutes before the measurement.
3. Remove tight clothing from your wrist and make
sure that the area for the cuff is free.
4. Sit upright at the table and relax for about 5
minutes to ensure that the measurement is made in
a steady atmosphere.
5. If you want to repeat the measurement, wait at
least 5 minutes.
- 7 -
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scala SC7400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scala SC7400 in the language / languages: English as an attachment in your email.

The manual is 0,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info