699394
32
Zoom out
Zoom in
Previous page
1/36
Next page
30 VERSA Plus SATEL
6. The message will confirm that a new detector has been added (unless you have entered
an invalid serial number, of which you will be informed by a message). The new zone
name will be displayed. You can change it.
7. Click on the “OK” button (you can click on the “Quit” button to cancel adding a new
detector or on the “Next” button to proceed to adding a next wireless detector).
8. Click on the “Write” button to write the new wireless detector data to the controller (these
data will not be written after clicking on the button in the main menu).
LCD keypad
You can add the 433 MHz wireless detectors in the service mode by means of the NEW
DEVICE
function (SERVICE MODE 2. HARDWARE 1. KPDS. & EXPS. 3. WIRELESS MOD.
1. NEW DEVICE).
1. Having started the function, enter the 7-digit serial number of the added detector and
press the key. The serial number can be found on the electronics board or on the
enclosure.
2. Open the detector tamper contact.
3. Information on the detector to be added will be displayed (if nothing happens, it can mean
that you have entered an invalid serial number – if this is the case, press to return
to the submenu). Press to confirm your intention to add a detector.
4. Using the and keys, select the zone to which the detector is to be assigned
and then press .
5. The new name of the zone will be displayed. You can change it. Press to save the
name.
6. In the next step, define whether the detector presence is to be monitored (see the
PROGRAMMING manual).
5.18.2 Removing 433 MHz wireless detectors
DLOADX program
You can remove the 433 MHz wireless detectors in the “Versa – Structure” window,
“Hardware” tab, after clicking on the VERSA-MCU controller name in the list of devices.
1. Click on the “Read” button to read the data related to wireless detectors from the
controller.
2. Click on the zone to which the detector you want to delete is assigned.
3. Click on the “Delete”
button. The “Confirm” window will open.
4. Click on the “Yes” button. The “Confirm” window will close.
5. Click on the “Write” button to save the changes to the controller.
LCD keypad
You can remove the 433 MHz wireless detectors in the service mode by means of the
REMOVE DEVICE function (SERVICE MODE 2. HARDWARE 1. KPDS. & EXPS. 3. WIRELESS
MOD
. 3. REMOVE DEVICE).
1. Having started the function, use the
and keys to select the zone to which the
wireless detector to be removed is assigned, and then press
.
2. A prompt will appear asking you whether the detector is to be deleted (detector type and
serial number will be displayed). Press . The detector will be deleted.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa Plus in the language / languages: English as an attachment in your email.

The manual is 0,76 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa Plus

Satel Versa Plus User Manual - English - 44 pages

Satel Versa Plus Additional guide - English - 110 pages

Satel Versa Plus Quick start guide - English - 11 pages

Satel Versa Plus Installation Guide - English - 32 pages

Satel Versa Plus Quick start guide - German - 12 pages

Satel Versa Plus Additional guide - German - 113 pages

Satel Versa Plus User Manual - German - 46 pages

Satel Versa Plus Installation Guide - German - 36 pages

Satel Versa Plus Quick start guide - Dutch - 11 pages

Satel Versa Plus User Manual - Dutch - 46 pages

Satel Versa Plus Additional guide - Dutch - 110 pages

Satel Versa Plus Additional guide - Dutch - 2 pages

Satel Versa Plus Installation Guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info