699394
10
Zoom out
Zoom in
Previous page
1/11
Next page
8 VERSA Plus SATEL
The user can have two keyfobs:
433 MHz keyfob – supported by the 433 MHz keyfobs receiver expansion module or 433
r,
ecuted. The list of functions assigned to the
red the
MHz wireless system controlle
APT-100 bidirectional keyfob – supported by the ABAX wireless system controller.
A single keyfob enables up to 6 functions to be ex
buttons / combination of buttons should be obtained from the person who configu
keyfob settings when adding / editing a user. In the case of APT-100 keyfob, that person
should also provide information about functionality of the LEDs. The keyfob LEDs can be
used to confirm execution of functions, as well as to indicate the system status (pressing
a button on the APT-100 keyfob is accompanied by the LEDs flashing rapidly three times,
and in a little while the LED(s) may come on for 3 seconds to provide information).
3. Operating the alarm system by telephone
You can operate the alarm system by using a touch-tone (DTMF
makes the operation an easy job. To access the voice menu, c
) telephone. The voice menu
all the phone number of the
control panel. Establish, in consultation with the installer, the phone number to call to get
access to the voice menu.
3.1 Starting the operating by telephone
1. Call the control panel phone number. After the
beeps.
call is received, you will hear three short
The installer can configure the control panel in such a manner that the analog
telephone communicator will only go off hook after the recall. If this is the case, call the
number, but hang up after the number of rings which has been set by the installer. Call
again within three minutes. The call will be received.
2. En
foll s to the interactive voice menu. If
ter the code from the telephone keypad and confirm by pressing #. 4 short beeps
owed by 1 long beep will confirm you have got acces
your code does not authorize you to get access, you will hear three long beeps in the
headset. If the code is incorrect, you will hear two long beeps in the headset.
The installer can allow for getting access to the voice menu from some defined phone
numbers without the code authorization (step 2 is skipped).
3. Me
telephone keys you should use to be able to operate the control panel.
ssages of the interactive voice menu will be played back. They will inform you which
3.2 Ending the operating by telephone
1. Press
*
key.
2. Press in turn the 0# keys. The control panel will go on-hook.
l panel will goes on hook automatically after one minute of idle state. The contro
S control 4. SM
The alarm system can
control commands. The
be operated by means of the SMS messages containing suitable
SMS message must be sent to the number of the currently used SIM
card. The contents of control commands is to be programmed by the installer. Additionally,
the installer defines what the control panel is to do after receiving the control command, as
well as which users and from which phone numbers can operate the control panel using the
SMS messages.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa Plus in the language / languages: English as an attachment in your email.

The manual is 0,37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa Plus

Satel Versa Plus User Manual - English - 44 pages

Satel Versa Plus Additional guide - English - 110 pages

Satel Versa Plus Installation Guide - English - 36 pages

Satel Versa Plus Installation Guide - English - 32 pages

Satel Versa Plus Quick start guide - German - 12 pages

Satel Versa Plus Additional guide - German - 113 pages

Satel Versa Plus User Manual - German - 46 pages

Satel Versa Plus Installation Guide - German - 36 pages

Satel Versa Plus Quick start guide - Dutch - 11 pages

Satel Versa Plus User Manual - Dutch - 46 pages

Satel Versa Plus Additional guide - Dutch - 110 pages

Satel Versa Plus Additional guide - Dutch - 2 pages

Satel Versa Plus Installation Guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info