699394
30
Zoom out
Zoom in
Previous page
1/32
Next page
28 VERSA Plus SATEL
4. The test will be terminated automatically after the defined time has elapsed. You can
terminate it earlier by pressing .
3.19.2 Output test
The function makes it possible to check proper functioning of the system outputs as well as
devices connected to them.
You can always test 12 outputs.
1. Enter the user menu and press in turn . The keypad indicates the
output status by means of LEDs numbered from 1 to 12 (LED OFF – the output is
deactivated; LED ON – the output is activated). The blinking LED means that the cursor is
there. The
and keys allow you to move the cursor.
2. Press
to activate the output, or press to deactivate the output.
3. Press to terminate the function.
3.19.3 Checking the level / quality of radio / GSM signal
The function allows you to check:
the level of signal received by the GSM antenna,
the quality of radio signal received by the controller from 433 MHz wireless detectors (if the
VERSA-MCU controller is connected to the control panel),
the level of radio signal received by the controller from ABAX wireless devices (if the
ABAX system controller is connected to the control panel).
Enter the user menu and press in turn . The signal level / quality is
illustrated by LEDs designated by numbers:
1-15 – wireless devices assigned to zones from 16 to 30 / SIM 1 card,
16-30 – wireless devices assigned to zones from 1 to 15 / SIM 2 card.
The more LEDs are ON, the better is the signal level / quality. When all LEDs are ON, the
signal level / quality is 100%.
If the level / quality of signal from a wireless device is presented, the LED designated by the
number of zone to which the device is assigned is blinking. If the GSM signal is presented,
only the LEDs illustrating the signal level are steady on.
You can scroll through the list by using the arrow keys.
3.19.4 Starting the manual test transmission
Enter the user menu and press in turn . A “Manual reporting test” event will
be saved to the control panel memory. The event code will be sent to the monitoring station.
3.19.5 Checking the current supply voltage in modules
Not all modules provide information on the current voltage.
Enter the user menu and press in turn . Information on the supply voltage
of the lowest address module will be displayed. Blinking of the LED designated by the
number corresponding to the module address number (for address 0, LED 30 is blinking)
enables identification of the module. Depending on the module address, the supply voltage is
illustrated by the LEDs numbered 1-15 (address 0 and addresses from 16 to 21) or 16-30
(addresses from 1 to 15). To determine the voltage, sum up the number of LEDs which are lit
(a single LED corresponds to the voltage of 1 V). You can scroll through the list by using the
arrow keys.
30


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa Plus at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa Plus in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa Plus

Satel Versa Plus User Manual - English - 44 pages

Satel Versa Plus Additional guide - English - 110 pages

Satel Versa Plus Installation Guide - English - 36 pages

Satel Versa Plus Quick start guide - English - 11 pages

Satel Versa Plus Quick start guide - German - 12 pages

Satel Versa Plus Additional guide - German - 113 pages

Satel Versa Plus User Manual - German - 46 pages

Satel Versa Plus Installation Guide - German - 36 pages

Satel Versa Plus Quick start guide - Dutch - 11 pages

Satel Versa Plus User Manual - Dutch - 46 pages

Satel Versa Plus Additional guide - Dutch - 110 pages

Satel Versa Plus Additional guide - Dutch - 2 pages

Satel Versa Plus Installation Guide - Dutch - 36 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info