629722
8
Zoom out
Zoom in
Previous page
1/11
Next page
6 VERSA IP SATEL
1.7 Simple auto-arming deferment
Partition can be armed automatically by the
control panel is properly configured by the
timer on specific days at specific time. If the
installer, auto-arming can be easily postponed
from the LCD keypad during the auto-arming delay countdown. During the auto-arming delay
countdown the keypad displays a suitable message and, additionally, an audible signal can
be emitted.
Press the key twice to defer the auto-arming.
1.8 User menu
Enter the code and press to get access to the user menu. The list of available
on the state and configuration of the system. functions depends on your rights, as well as
In order to quit the function and/or user menu, press . The keypad will quit the menu
automatically, if 2 minutes have elapsed since the last keypress.
All user functions are described in the full user manual. Only a few selected functions are
discussed below.
1.8.1 Change own code
1. Enter the user menu and press in turn .
2. Enter the new code, and then press .
If a zone is not to trigger alarm, you can bypass it, when the partition to which the zone
e bypassing is useful, for example, when you want to leave
The inhibited zone will remain bypassed until disarming the partition it belongs to, or until
zone by the user.
1.8.2 Zone bypassing
belongs is disarmed. Zon
a window open when the system is armed or when a detector connected to the zone is out of
order and sets off false alarms.
Zone inhibiting
unbypassing the
Enter the user menu and press in turn . Information on the bypassed
zones will be displayed. How it will be presented depends on the type of keypad.
d in the lower line – the zone name. You can scroll through the zone list using
LCD keypad
Shown in the upper line of the display will be a message to inform you that the zone is
bypassed, an
the and keys. There is a symbol in the upper right corner of the display:
– zone is not bypassed,
– zone is inhibited,
– zone is isolated.
Press any number key to change the displayed symbol to one of the following symbols:
– the zone is to be inhibited,
– the zone is to be unbypassed.
If you want to see the status of all zones which you can inhibit/unbypass, press or
. The numbers around the display enable identification of the zones. Use the and
keys to move the cursor. To inhibit/unbypass a zone, hover the cursor over it and
any numeric key. If you want to restore the previous way of presentation of the zone
ress
press
list, p
or .
Press
to quit the function. The zones will be inhibited/unbypassed.
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel Versa IP at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel Versa IP in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel Versa IP

Satel Versa IP User Manual - English - 32 pages

Satel Versa IP Installation Guide - English - 36 pages

Satel Versa IP User Manual - English - 43 pages

Satel Versa IP Additional guide - English - 93 pages

Satel Versa IP Quick start guide - German - 11 pages

Satel Versa IP Additional guide - German - 97 pages

Satel Versa IP User Manual - German - 45 pages

Satel Versa IP Installation Guide - German - 38 pages

Satel Versa IP Quick start guide - Dutch - 2 pages

Satel Versa IP User Manual - Dutch - 45 pages

Satel Versa IP Quick start guide - Dutch - 12 pages

Satel Versa IP Additional guide - Dutch - 93 pages

Satel Versa IP User Manual - Dutch - 45 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info