699459
9
Zoom out
Zoom in
Previous page
1/11
Next page
SATEL VERSA 7
LED keypad
The state of zones is illustrated by LEDs designated by numbers. The steady-on LEDs
indicate which zones are inhibited or isolated. The blinking (flashing) LED means that the
cursor is situated there. Use the and keys to move the cursor. The cursor may
only be moved over the LEDs corresponding to the zones which can be bypassed or
unbypassed. Press any digit-bearing key to change the LED status:
LED ON – the zone is to be inhibited,
LED OFF – the zone is to be unbypassed.
Press to quit the function. The zones will be inhibited/unbypassed.
Zone isolating
The isolated zone will remain bypassed until it is unbypassed by the user.
Enter the user menu and press in turn . Information on the bypassed
zones will be displayed. How it will be presented depends on the type of keypad.
LCD keypad
The way of indicating the zone state and the procedure are identical to those used for
inhibiting the zones, but pressing any number key will change the displayed symbol to one of
the following symbols:
– the zone is to be isolated,
– the zone is to be unbypassed.
LED keypad
The way of indicating the zone status and the procedure are identical to those used for zone
inhibiting.
1.8.3 Viewing the event log
The function is only available in the LCD keypad.
Enter the user menu and press in turn . The last event that occurred in the
system will be displayed. The event description includes the time of its occurrence, its name
and additional information, e.g. the partition in which the event took place, the zone which
caused the event, etc. The additional information appears automatically a few seconds after
the event is displayed. Press or for the additional information to be displayed
sooner. To scroll through the event log, use the and keys.
1.8.4 Checking the troubles / system state
When the LED is blinking, you can check what caused this signaling. Enter the user
menu and press in turn
. The LCD keypad presents information on the display.
To scroll through the list, use the and keys. In the LED keypad, information on
troubles will be presented by means of LEDs (for description of the LEDs, please refer to the
LED keypad user manual).
2. Operating the alarm system by means of keyfob
The alarm system can be operated by means of keyfobs, if the 433 MHz keyfobs receiver
expansion module (INT-RX-S / INT-RX), 433 MHz wireless system controller (VERSA-MCU)
or ABAX wireless system controller (ACU-120 / ACU-270 / ACU-100 / ACU-250) is
connected to the control panel.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 0,36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Additional guide - English - 87 pages

Satel VERSA 10 Installation Guide - English - 36 pages

Satel VERSA 10 User Manual - English - 32 pages

Satel VERSA 10 User Manual - English - 42 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info