699459
31
Zoom out
Zoom in
Previous page
1/32
Next page
SATEL VERSA 29
deactivate for 16 seconds the 11. FIRE DETECTORS POWER SUPPLY function output (to clear
the alarm memory of fire detectors),
activate the 21. D
ETECTORS RESETTING function output.
Enter the user menu and press in turn .
3.20 Service
The functions related to control panel programming (starting local or remote programming)
are described in the PROGRAMMING manual.
3.20.1 Defining the service access rules
Enter the user menu and press in turn . The status of options related to the
access to the alarm system by the person using the service code is illustrated by the LEDs
designated by numbers. The LEDs lit solid indicate which options are enabled. Blinking of the
LED means that the cursor is positioned there. The and keys allow you to move
the cursor. You can only move the cursor onto the LEDs illustrating the available options.
Press any numeric key to change the LED status (turn ON/OFF). Press
to confirm the
changes made and quit the function.
Description of the options
In the square brackets, the description of options presented on the LCD keypad is shown.
1 [Permanent access] – if the option is enabled, the service code can be used to get access
to the alarm system at all times.
If the alarm system is to meet requirements of the EN 50131 standard for
Grade 2, the service code access should be time limited.
2 [Edit users] – when the option is enabled, the person using the service code can add, edit
and remove users.
3 [Arm/Dis/Clr/Bps] – when the option is enabled, the person using the service code can arm
and disarm the system, clear alarms, and bypass zones (inhibit or isolate).
3.20.2 Defining the service access time
The function is available when the PERMANENT ACCESS option is disabled (see: “Defining the
service access rules”).
Enter the user menu and press in turn . LEDs 1-12 will present the number
of remaining hours during which you can get access to the alarm system by using the service
code (see page 11 Table 1). Enter a new value from the range of 0 to 255 hours and press
.
3.20.3 Replacing batteries in wireless keypad
The function is available if a wireless keypad is installed in the alarm system. The function is
supported by ACU-120 / ACU-270 controller with firmware version 5.03.
1. Enter the user menu and press in turn .
2. The LEDs with numbers corresponding to the addresses of wireless keypads in the
system will go on (LED 30 for the address 0).
3. Keep pressing or until the LED whose number corresponds to the address of
the keypad in which you want to replace the battery starts blinking.
4. Press . The status of tamper switch in the keypad will not be checked for 3 minutes,
which allows you to replace the battery.
31


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel VERSA 10 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel VERSA 10 in the language / languages: English as an attachment in your email.

The manual is 0,71 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel VERSA 10

Satel VERSA 10 Quick start guide - English - 11 pages

Satel VERSA 10 Additional guide - English - 87 pages

Satel VERSA 10 Installation Guide - English - 36 pages

Satel VERSA 10 User Manual - English - 42 pages

Satel VERSA 10 Quick start guide - German - 11 pages

Satel VERSA 10 Additional guide - German - 89 pages

Satel VERSA 10 User Manual - German - 44 pages

Satel VERSA 10 Installation Guide - German - 37 pages

Satel VERSA 10 Quick start guide - German - 2 pages

Satel VERSA 10 Quick start guide - Dutch - 11 pages

Satel VERSA 10 User Manual - Dutch - 44 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages

Satel VERSA 10 Additional guide - Dutch - 86 pages

Satel VERSA 10 Installation Guide - Dutch - 35 pages

Satel VERSA 10 Quick start guide - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info