699464
7
Zoom out
Zoom in
Previous page
1/10
Next page
SATEL PERFECTA 5
1.2.4 Arming without delay
If there is nobody in the partition or nobody is leaving the partition which is to be set to the
day / night armed mode, you can arm the partition without exit delay (there will be no beeps
accompanying the exit delay countdown). When setting the partition to one of the above-
mentioned armed modes, hold down the armed mode selection key ( , or ) for
about 3 seconds. The exit delay countdown will not run.
1.2.5 Terminating the exit delay countdown
When the exit delay countdown is running, you can terminate it, thus shortening the exit
delay time. Press and hold down , or for about 3 seconds (it is of no
consequence which key you will press).
1.3 Disarming and alarm clearing
Alarm clearing results in canceling the voice messaging about alarm (unless the
control panel has already managed to notify the users about the alarm).
1.3.1 Disarming and alarm clearing without partition selection
Enter the code and then press . Disarming / alarm clearing will take place in the
partitions to which you have access.
1.3.2 Alarm clearing without disarming
If the partition is armed and you want to clear the alarm without disarming the partition, enter
the code and then press , or (it is of no consequence which key you will
press). In the partitions you have access to, the alarm will be cleared.
You cannot clear the warning alarm without disarming the system first.
1.3.3 Disarming and alarm clearing in selected partition
1. Select the partition which is to be disarmed and/or where alarm is to be cleared (press
one of the keys:
- partition 1; - partition 2).
2. Press . Backlight of the keys will start flashing, which indicates that the code must be
entered.
3. Enter the code.
4. Press or .
5. Selected partition will be disarmed / alarm will be cleared.
1.4 Output control
Consult the installer whether the quick control of outputs is available (the controllable outputs
must be assigned to the keys designated with digits). If the quick control is available, you can
turn ON/OFF devices connected to the outputs without having to enter the code. If the quick
control is not available, you can only control the operation of devices by using the 8.OUTPUTS
CTRL
. user function.
Quick activation of output
Press the key to which the controllable output is assigned, and then .
Quick deactivation of output
Press the key to which the controllable output is assigned, and then .
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel PERFECTA 16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel PERFECTA 16 in the language / languages: English as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel PERFECTA 16

Satel PERFECTA 16 User Manual - English - 31 pages

Satel PERFECTA 16 Additional guide - English - 49 pages

Satel PERFECTA 16 Additional guide - English - 50 pages

Satel PERFECTA 16 Installation Guide - English - 27 pages

Satel PERFECTA 16 User Manual - German - 32 pages

Satel PERFECTA 16 Additional guide - German - 52 pages

Satel PERFECTA 16 Additional guide - German - 50 pages

Satel PERFECTA 16 Installation Guide - German - 28 pages

Satel PERFECTA 16 Quick start guide - Dutch - 11 pages

Satel PERFECTA 16 User Manual - Dutch - 32 pages

Satel PERFECTA 16 Additional guide - Dutch - 52 pages

Satel PERFECTA 16 Additional guide - Dutch - 50 pages

Satel PERFECTA 16 Installation Guide - Dutch - 28 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info