699878
4
Zoom out
Zoom in
Previous page
1/4
Next page
4 AMD-102 SATEL
9. Screw the wires for roller shutter detector and/or NC type detector to the terminals on
electronics board.
10. Close the detector enclosure.
11. Secure the magnet, taking into account the maximum permissible distance from the reed
switch (Fig. 5). The distance shown applies to the magnet located at the reed switch height.
Location of the reed switches in the enclosure is shown in Fig. 3.
12. Configure the detector:
magnetic contact: define which of the two reed switches is to be enabled,
roller shutter input: program the pulse count (the number of pulses after which the input
will be violated) and pulse validity duration (the time counted from pulse registration during
which subsequent pulses must occur for the input to become violated).
For detailed information regarding configuration of the detector, please refer to the manual for
ABAX wireless system controller.
13. Start the test mode.
14. Depending on the configuration of detector, check that the LED goes on:
after moving the magnet away (opening the window / door),
after raising / lowering the roller shutters supervised by the roller shutter detector,
after violation of a detector connected to the M input.
SAT
EL sp. z o.o. • ul. Budowlanych 66 • 80-298 Gdańsk • POLAND
tel. + 48 58 320 94 00
www
.satel.eu
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Satel AMD-102 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Satel AMD-102 in the language / languages: English as an attachment in your email.

The manual is 0,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Satel AMD-102

Satel AMD-102 User Manual - German - 4 pages

Satel AMD-102 User Manual - Dutch - 4 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info