31133
3
Zoom out
Zoom in
Previous page
1/16
Next page
- 3 - EN
3. Preparation for Use
2
2
LANGUAGE SELECT
B ENGLISH [ON]
FRANCAIS
ESPAÑOL
Hint
Hint
Repeat these steps only if either there was
a power failure or this unit has been
unplugged for more than 30 seconds.
1
1 Turn on the TV and
set it to channel 3.
If channel 3 is already occu-
pied for broadcasting, see RF Output
Channelsection.
POWER
STOP
PLAY
3
3
CH 01
AUTO SET UP
F.FWD
To Select a Channel
You can select a channel by using
the Number buttons on the remote
control.
Notes for using the Number
buttons:
When selecting cable channels which
are higher than 99, enter channel
numbers as a three-digit number. (For
example: 117, press [1], [1], [7])
You must precede single-digit
channel numbers with a zero (For
example: 02, 03, 04 and so on).
To Preset the Channel Again
1) Press [MENU] until the main menu appears.
2) Press
[PLAY
BB
] or [
CC
STOP] to select
CHANNEL SET UP, then press
[F.FWD
gg
].
3) Press
[PLAY
BB
] or [
CC
STOP] to select
AUTO SET UP
, then press
[F.FWD
gg
]. After scanning, the tuner stops
on the lowest memorized channel.
To Change the On-Screen Language
1) Press [MENU] until the main menu appears.
2) Press
[PLAY
BB
] or [
CC
STOP] to select
LANGUAGE SELECT, then press
[F.FWD
gg
].
3) Press
[PLAY
BB
] or [
CC
STOP] to select
ENGLISH, FRANCAISor ESPAÑOL,
then press
[C.RESET/EXIT].
1
1
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
B CHANNEL SET UP
CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
MENU
2
2
CHANNEL SET UP
AUTO SET UP
B MANUAL SET UP
STOP
PLAY
3
3
MANUAL SET UP
CHANNEL 30 (CATV)
ADD
4
4
MANUAL SET UP
CHANNEL 30 (CATV)
DELETE
STOP
PLAY
F.FWD
F.FWD
STOP
PLAY
F.FWD
1
1
- M E N U -
TIMER PROGRAMMING
AUTO REPEAT [OFF]
CHANNEL SET UP
B CLOCK SET
LANGUAGE SELECT
AUDIO OUT
TV STEREO [ON]
SAP
MENU
2
2
CLOCK SET
MONTH DAY YEAR
1 0 / ––
HOUR MINUTE AM/PM
: ––
STOP
PLAY
STOP
PLAY
F.FWD
F.FWD
3
3
CLOCK SET
MONTH DAY YEAR
1 0 / 0 3
HOUR MINUTE AM/PM
: ––
STOP
PLAY
F.FWD
4
4
CLOCK SET
MONTH DAY YEAR
1 0 / 0 3 2 0 0 5
HOUR MINUTE AM/PM
: ––
STOP
PLAY
F.FWD
5
5
CLOCK SET
MONTH DAY YEAR
1 0 / 0 3 MON 2 0 0 5
HOUR MINUTE AM/PM
0 5 : ––
STOP
PLAY
F.FWD
6
6
CLOCK SET
MONTH DAY YEAR
1 0 / 0 3 MON 2 0 0 5
HOUR MINUTE AM/PM
0 5 : 4 0
STOP
PLAY
F.FWD
7
7
CLOCK SET
MONTH DAY YEAR
1 0 / 0 3 MON 2 0 0 5
HOUR MINUTE AM/PM
0 5 : 4 0 P M AM
B PM
STOP
PLAY
Hint
Hint
To go back one step, press [
hh
REW]
(during the steps 2) to 7)).
Your clock setting will be lost if either there
is a power failure or this unit has been
unplugged for more than 30 seconds.
REW
F.FWD
No
No
Please wait for a few minutes.
After scanning...
The tuner stops on the lowest memorized
channel.
You can select only the channels memorized
in this unit by using
[CHANNEL ].
If AUTO SET UP appears on the TV screen
again, check the cable connections. Then,
press
[F.FWD
gg
] once again.
Hint
Hint
If you accidentally select Spanish or French
and need English: Press [MENU] and
choose SELEC. IDIOMA, or SELECTION
LANGUE. Press [F.FWD
gg
] and select
ENGLISH. Finally, press [C.RESET/EXIT].
Select ADDor DELETE.
Select the channel to be
added or deleted.
5
5 To exit the
menu
C.RESET
EXIT
Select the current month.
Select the current day.
Select the current year.
Select AMor PM.
8
8 To exit the CLOCK SET
screen
Select the current hour.
Select the current minute.
Y
Y
es
es Press [MENU] to
exit.
Refer to Hints for Cable Box or
Satellite Box section on page 1.
Do you connect the cable of the cable box or
the satellite box to the units ANT-IN jack?
Ye s
No
Clock Set UpTo Add/Delete ChannelsTurn On the Unit for the First Time
TV ScreenRemote Control
F.FWD
If the clock is not set, the
CLOCK SET screen
appears when you press
[MENU]. In this case, go
to step 2).
or
or
or
or
or
or
or
or
or
or
or
or
Need help? Call
1-800-813-3435
HJ420UD_EN/SP.QX33 05.1.14 14:06 Page 3
3


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sanyo VWM950 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sanyo VWM950 in the language / languages: English as an attachment in your email.

The manual is 1,21 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info