489519
4
Zoom out
Zoom in
Previous page
1/40
Next page
4
SAFETY PRECAUTIONS
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause
overheating. Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When
placing on a shelf leave 10 cm (4 inches) free space around the entire unit.
Notes when mounting the Plasma Display on a wall
When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the Plasma
Display and the wall. Clearance of less than 6 cm (2 1/2 inches) will obstruct the vents and may cause the
interior of the unit to overheat, resulting in damage to the unit.
If the unit is to be mounted on the wall, contact the retailer where you purchased the Plasma Display for
advice, and have the equipment professionally installed. Incomplete or improper installation may cause injury
to you and/or the Plasma Display.
Bracket holes: To attach a wall mounting bracket (not supplied) here, remove the screws.
IMPORTANT NOTICE
Possible Adverse Effects on Plasma Screen: If a fixed (non-moving) pattern remains on the plasma screen
for long periods of time, the image can become permanently engrained in the plasma display panel and cause
subtle but permanent ghost images. This type of damage is NOT COVERED BY YOUR WARRANTY. Never
leave your plasma display on for long periods of time while it is displaying the following formats or images:
Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.
Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a
normal (4:3) display (gray bars at top and bottom of screen); or viewing normal style (4:3) media on a
widescreen (16:9) display (gray bars on left and right sides of screen).
To avoid the engraining, we recommend that you use the screen saver function. (see P.34)
The following symptoms are not signs of malfunction but technical limitation. Therefore we disclaim
any responsibility for these symptoms.
Plasma display panels are manufactured using an extremely high level of precision technology,
however sometimes parts of the screen may be missing picture elements or have luminous spots.
This is not a sign of a malfunction.
Do not install the Plasma Display near electronic equipment that is susceptible to electromagnetic waves.
Some equipment placed too near this unit may cause interference.
Effect on infrared devices – There may be interference while using infrared devices such as infrared
cordless headphones.
10cm
Bracket holes
3V00101A_En_p02-11 6/2/05, 4:40 PM4
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sansui HDPDP4200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sansui HDPDP4200 in the language / languages: English as an attachment in your email.

The manual is 2,44 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info